Jump to content
SAU Community

Recommended Posts

You should be able to just load the games straight onto ur xbox. I got a chip from gamefix around 2-3 years ago that allows me to put a game in, and rip it's contents onto the hard drive and play it whenever i want without the disk. I have a mass storage of roughly 160games, and I've filled it up lol. SHould be very cheap to get done nowadays.

www.gamefix.com.au

TO do this you need to donwload a p2p program to connect up your xbox to your pc.

Connect your xbox to your pc obviously through a network cable. Place the game in the xbox and using p2p program (you must obtain your xbox's ip address to connect) connect to the xbox. Access the dvdrom on the xbox and copy all the data to your hard drive. This takes the longest ammount of time.

Once this is done you must create a ISOX file. This is so it is bootable on the xbox. Just look for an ISOX program which are normally run in dos format and just zip it up for you.

Last but not least burn the ISOX image using nero and your done.

Edited by krzysiu

Ok. Sky do you have Nero 7? If so, create a DVD video and add you movie file and burn it off. Use a DVD+R, DVD-R is standalone DVD player readable. Some comps can read them, but use DVD+R and it will work on DVD player if you follow what i wrote :P

Now for the .bin and .cue files. Use daemon tools to mount these, this will create a virtual drive. Go to my computer and there should be a new drive in the now that wasn't there before. Go into it, then find the video file (Usually in MPEGV i think its called). Now copy that movie onto the desktop then use what i said about burning the dvd above and it will work on a DVD player.

Yeh. Nero also enables you to change the file to PAL though. All our DVD players are PAL, and sometimes files are NTSC, so nero enables you to change it to PAL for dvd players.

So just use your convertX and just follow my daemon tool guide and ull be all good.

  • 2 weeks later...
does anyone know if 360's can be modded yet?

There is a dvdrom firmware hack that fools the xbox360 that a 'genuine' game has been inserted - where infact its a backup.

All you need to do is pull apart you xbox360 (voids warantee) and flash your xbox360's drive with the hacked firmware. There are plenty of tutorials around to step you through the process - but its all pretty easy.

The easiest way to get games for ur chipped xbox is to use a prog call Qwix. It's free and piss easy.

Just d/l an xbox game iso off torrenspy or whereever u d/l u stuff from. once it's download connect ur xbox to ur PC with a network cable. open Qwix and load the ISO file and click Go. all done in like 10mins (depending on ISO size).

  • 3 weeks later...

This is illegal, and suprised no one has closed this thread..... but just to clear some stuff up :P

Use DVD-R's, XBOX designed to read -R's, may read +R's but you could be degrading the quality of its dvd drive if you excessively use DVD+R's. (PS2's use DVD+R) And for the love of god don't use laser DVD's. They suck more than you'd think.

You use a connector cable, not a network cable to connect the two.

I use programs like Smart FTP to link the xbox to the PC. Mind you - turn your internet off when you use this program. It opens ports and makes your computer more suseptable to hackers, malware, etc.

For burning - Power DVD I think is the best program out there. Nero is fine also, when burning make sure your speed is slow, 2x, or 4x max.

Do not burn games to your stock HDD, use a larger one. This does void Microsofts' warranty mind you. If you burn it to your stock HDD, it works a few times but can make your XBOX crash and ultimately screw your XBOX's chipped operating software. Then you'll need to whipe your HDD, and freshly install a new copy :(

For more in depth info go to http://www.copying-xbox-games.com/

Ps. I don't condone burning XBOX games :rofl:

  • 1 month later...

When i said get a bigger HDD and copy the games directly to it i meant the XBOX HDD, not the PC, ive got a program on my XBOX that will let me load any XBOX game onto the XBOX's HDD. I thought these programs were standard once your box is chipped?!?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...