Jump to content
SAU Community

Recommended Posts

well as it so happens, i was an AE86 drifter for many a year.

My AE86 had a Toyota Racing Development 2way LSD and about 85 kw at the tyres. The difference being that it was a live axle arrangement. My 86 was very oriented toward going sideways rather than going fast. And therefore a flick of the wrist in 2nd or 3rd gear would result in a drift being initiated. This was more to do with the pinion angle and the rose jointed rear end than the diff.

If you wish to go fast point to point, even in an NA skyline, first spend your money on some 9 or 10 inch wide rims and good tires. I firmly believe a viscous LSD from a turbo skyine will be adequate as your unlikely to overcome the ability of that diff with NA power. But if you can get that 1 way mega cheap, then get that.

from what i was reading earlier in this post, why would you want to change to a turbo vlsd diff, the diff in my na at least is a vlsd na diff, with the shorter ratio it will accellarate quicker and its still the same viscious lsd set-up.

If you wish to go fast point to point, even in an NA skyline, first spend your money on some 9 or 10 inch wide rims and good tires.
Definitely..

Run decent tyres with VLSD and you can get away without having to run a better diff. Run crap tyres that break loose easily and it will single spin and just not hook up.

i already have a set of track rims with 255 tyres, and have some semi slicks in the pipeline as my wallet allows me.

thanks for the insight andy - looks like i'll be making some enquires into this diff.

from what i was reading earlier in this post, why would you want to change to a turbo vlsd diff, the diff in my na at least is a vlsd na diff, with the shorter ratio it will accellarate quicker and its still the same viscious lsd set-up.

some na skylines didn't come with an lsd - so swapping to a vlsd using their standard crown and pinion to maintain their short ratio is an upgrade.

Depends what you mean by Na diff...

An R200 is an R200 all the same strength.

The diff centers, one being the weaker N/A the other being the tough but single spinner VLSD and in the GTR's case Mechanical clutch LSD.

So either way your going to have to spend another couple hundred having a diff specialist (Boss Automotive here in SA) setup the ratio with your LSD, he also shims up the vlsd crap while your there.

I have a 4.363:1 ratio for $100. So it will be a 300-400 exercise to swap ratio's with backlash etc all setup nicely.

  • 2 weeks later...

hey i own a 1992 r32 type m gts25 and i dont think it has a lsd but anyhow its starting to make clicking noises when taking off gently from first and also in reverse, im wondering how bad this is and if ther is a solution for it, it doesnt help that the idiot at the tire shop put 245's all round from 215-225's, i was thinking of swaping with a gtst diff but now reading this with the ratios maybe i ought to find a na lsd 1.5?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...