Jump to content
SAU Community

Recommended Posts

have had this problem happen previously where i just fitted a 2nd hand clutch pedal box unit, but now the problem has happened again and im determined to fix it. what has happened is that one of the clutch pedal box brackets have bent or cracked due to the pressing in of the clutch as i have a heavy clutch (not factory). has anyone else had this problem? how did you fix it? does nismo or any of the other brands have a heavy duty replacement?

thanks..

Link to comment
https://www.sau.com.au/forums/topic/159885-r33-clutch-pedalbox-problem/
Share on other sites

Maybe look at the hydralic's

Nismo make a bigger slave cylinder, that my help

Maybe talk to some about modifing the master cylinder to get more pressure

GTR's run a booster assist master cylinder, so maybe you could fit one of these. Would need to recess it approx 40mm into the fire wall thuo. A bit of work.

(I do not really have a clue, but these are some thoughts)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...