Jump to content
SAU Community

Recommended Posts

hey i been reading a lot of the topics lately and so far 2 of my 3 questions have been answered. My last question is I'm looking to buy a GT-T34 a manual or i get a auto and convert to manual later on. Does anyone have any idea how much it cost for a conversion or am i better off buying a manual straight off.

It's the two 34's for sale on excite autos that i'm debating with.

Automatic GT-T34 - $22,900

Manual GT-T34 - $25,900

Can anyone also tell me is it a good deal to buy either of the two 34's.

Thank you

Link to comment
https://www.sau.com.au/forums/topic/160362-manual-conversion/
Share on other sites

hey mate go get the manual it will save you money.

i have a 31 which is diffrent to the 34 but the same pricerple apply.

first you will have to find a manual kit. i.e box fly wheel alternator clutch peddle brake peddle all that stuff. except to pay $800 for a r31 kit. then you may have to get a new clutch or the box rebuild then hence will cost more (box apx $1000) clutch depends on which one u get.

u will then have to find out what has to be done and what has to be bloked of (i.e r31 have to loop the nutral switch).

and lasterly ARE u going to do the convertion or is a merchanic as this is a very labor intensive job. exspect 2-3 day if u know what your doing.

hope this helps.

brentt

thanks for that, help appreciated. has anyone seen the manual gt-t34 on excite autos site? if you have you reckon its worth buying? or anywhere where i can pick up a manual gt-t34 that is in good running condition?

Edited by skyline[32]
thanks for that, help appreciated. has anyone seen the manual gt-t34 on excite autos site? if you have you reckon its worth buying? or anywhere where i can pick up a manual gt-t34 that is in good running condition?

Can you post a link to it?

Would make it a lot easier to give an opinion on it.

And as mentioned above, dont even consider getting the auto and converting it to manual..... :glare: at the thought of it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...