Jump to content
SAU Community

Recommended Posts

Is there anyone in J at the moment who has access in some way to a genuine BNR32 N1, V-SPEC N1 or V-SPEC II N1. I'm desperately tyring to confirm how many ports were on the master cylinder fitted to this car as it didn't come with ABS so I assume it's a 3 port jobby.

If you're able to take close up photos of any markings, and if it's a 3port and Nissan part number would be a bonus.

Reason for asking here is it's likely there'd be more on the ground over there.

Cheers

Brendan

Edited by VSPEC32
Link to comment
https://www.sau.com.au/forums/topic/160455-need-help-regarding-bnr32-n1/
Share on other sites

OK, I managed to track some pics down off of Yahoo Japan of a BNR32 N1 brake master cylinder (BM50). Someone else did a screen grab from the Nissan FAST application of brake master cylinders with numbers starting with #46010. Just need someone here to do a translation on the last column of the marked lines from the screen grab:

These photos relate to #46010-05U01 for RB26DETT.GT-R.17 N1 (which I think relates to the V-spec N1) which is number 5 on my list below.

http://www.ipixel.com.au/temp/bnr32n1bmc/bnr32n1bmc1.jpg

http://www.ipixel.com.au/temp/bnr32n1bmc/bnr32n1bmc2.jpg

http://www.ipixel.com.au/temp/bnr32n1bmc/bnr32n1bmc3.jpg

http://www.ipixel.com.au/temp/bnr32n1bmc/bmc-46010-range.gif

TIA

Brendan

Edited by VSPEC32

line 5 in the 'specifications' column says: 'Tokiko 1 benbutsu kakunin N1 shou'

line 6 in the 'specifications' column says: 'Nabuko 1 genbutsu kakunin N1 shou'

I think its referring to two different parts makers for the Nissan N1 part, being Tokiko and Nabuko.

you should notice the one in the picture you attached earlier has the Tokiko mark on it.

genbutsu means 'original'

not sure what benbutsu means yet

butsu (also read 'mono') means 'thing' in English....

gen translates as 'origin' (as itself it means 'field' though)

so genbutsu literally translated is 'origin thing' = 'original'

I'm still trying to find what the 'ben' in benbutsu means though.

thats the trouble with it being in katakana, because you cant just look up the kanji

I have a feeling that the 'shou' at the end of both lines just means 'type' or 'variant', so 'N1 shou' means 'N1 type'.

This is off the top of my head though and I couldn't be bothered checking my kanji dictionary because 'shou' is one of the most common characters and has about a gazillion different meanings.

Has anyone else got anything else to add?? Feel free to add stuff, discuss, or ask questions.

I hope this helps a little bit at least, VSpec32.

Cheers

I've asked around about the 'benbutsu' aswell, my father-in-law reckons it's a typo... have you seen 'benbutsu' anywhere else on Nissan fast? Whatever the case, they're just saying 'genbutsu kakunin n1 shou' means '(visually) check that the part is an N1'. Can't help much more than that sorry.

Edit: too late... lol

  • 4 weeks later...

OK, didn't want to repeat myself about all the details so here's a link to a post on my blog about the Brake Master Cylinder information:

http://www.sillbeer.com/2007/04/brake-mast...er-upgrade.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...