Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

If you are after an exhaust that will last the longest then stainless steel is the best as mild steel will rust after a while due to the condensation in the exhaust.

The best way to go is to go and see an exhaust shop. I have seen a few good results from City exhaust, and Roadway and they are cheap compared to one quote from a certain "EXHAUST shop" in mitchell(which we wont name. Wink") which was over double the price of every other shop.

Tell them that you want it to be legal noise DB and the best flowing and they will be able to make one for your purpose(make sure you get it in writing that it is within specs and that way if you get pulled over and fined you can put it back on them to fix it.

By law you can not have any adjustable devices on your exhaust like butterfly's or adj tips so steer clear if you want it legal.

For catylytic convertors go for a metal substrate style as they will last the longest and flow the best use one that is the same size

as your exhaust or larger and for sizing of the exhaust go for 3 1/2" and make sure the pipe straight of the turbo flares up from the turbo size directly into the size exhaust you are getting as once the exhaust gas leaves the turbo it cools very rapidly and the gas expands, in doing so the gas slows down in speed so by going bigger it will keep the air speed up.

Hope this helps

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3003860
Share on other sites

What kind of prices would i be looking at for a basic no-name, stainless steel, straight 3.5" catback exhaust from an exhaust shop and how much is the difference in price between name brands and no-name brands, is the markup on name brands (HKS, Trust etc) similar to markups on shoes and clothes (paying for the name)? Also is there any real performance/quality difference in the two?

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3004406
Share on other sites

You will usually pay more for the name brands as they are made for Jap market so they are a direct fit due to most people want to fit them themselves because workshops are very dear on labour. Most good exhaust shops can make an exhaust to make the same power and last as long as the name brand stuff and you will probably pay between $600 and $1000 depending on what material you use and what cat

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3007977
Share on other sites

  • 3 weeks later...

Hey Guys,

Sorry for bringing up an old thread again but had a few questions that related to this.

Im looking at a Trust PE2 for my (mostly stock,) r33 GTS-T and was wondering:

a) what do people that currently run a pe2 think?... is the sound ok? ie not droning whole time

b) anyone live over the border (QBN) have trouble with rego?

cheers

Max

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3048493
Share on other sites

Hey Guys,

Sorry for bringing up an old thread again but had a few questions that related to this.

Im looking at a Trust PE2 for my (mostly stock,) r33 GTS-T and was wondering:

a) what do people that currently run a pe2 think?... is the sound ok? ie not droning whole time

b) anyone live over the border (QBN) have trouble with rego?

cheers

Max

No idea on the actual exhaust, but you should be right if you haven't got a PFC/Boost Controller, reasonably sized wheels and the stock airbox on it.

Jayce lives that side of the border, so he might be able to clarify a bit better.

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3048681
Share on other sites

Just make sure it passes for noise,AND get it engineered if you're concerned about being yanked at a later date. Check the lowest point is higher than 100mm off the ground(any parts on the car really,but a new exhaust is easy to have this go wrong)-the NSW boys are big on anything lower than legal...

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3048711
Share on other sites

  • 2 weeks later...

dont know if you still wanted info on a exuast system but im just letting you know that the boys a trojan just got the trust kits in and there on special for this month they are awsome to deal with and i have nothing but good things to say so you might wanna give it a look.

kind regards Peter

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3067426
Share on other sites

My plan is Power FC and cat back without the boost resticter (already gone). I was going to go Trust PEII I think it is, cause it is quiet. However I really don't want a cannon, I would much prefer the stock look of simple twin pipes. Aside from the $1100 stainless exhaust from Unique I think it is, does anyone have any suggestions? My criteria is little drone, decent flow and not much over the limit and of course no cannons preferably :P

ETA: Not that I dislike the look of cannons (certainly not the case - quite the opposite on the right cars), just prefer to be as subtle as possible for attention reasons :action-smiley-069:

Edited by GT-R32
Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3068155
Share on other sites

Yep still in the market for an exhaust but still not able to decide between HKS HP and the Trust PEII, could someone possibly record what their PEII sounds like on idle and higher rpm, could only find 1 clip of it on youtube while the HKS high power has a fair few.

PEII on 34 GTT -

HKS HP on 33 GTST -

HKS HP on 34 GTT (flame :P) -

HKS 34 GTT High Power silent -

Any comments on the sounds of both? Would the HKS be over the legal dB limits? Swaying towards the HKS but all depends on legality, cant really afford a defect :action-smiley-069:

Also Faith R33, what are trojan charging for the trust kits without installation

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3068300
Share on other sites

I think Trojan may be charging $880 for both fitted at the moment... not sure. The HKS one is quite a bit louder I have been told, not legal. The Trust one would probably not be legal but closer to the mark.

I think I am going to buy recce's XForce and have a system made up using that. Will come out cheap in mild steel, now to find a good resonator...

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3068354
Share on other sites

hmm 880 including fitted is pretty good, most places are charging $800-900 for the product alone. So the HKS is definitely not legal while the trust is might be. Any idea how long the special is on for, might have to give them a call :P

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3068380
Share on other sites

Yeah give em a call. Certainly don't take my word as gospel though :P That is cheap so big chance I may be wrong! It is a special though.

hmm 880 including fitted is pretty good, most places are charging $800-900 for the product alone. So the HKS is definitely not legal while the trust is might be. Any idea how long the special is on for, might have to give them a call :action-smiley-069:
Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3068414
Share on other sites

Bakes, you been getting my SMS'? Are you ignoring me? Is it me? Why? I can change..!

I've been offered an HKS dual exhaust (apprently hard to find) for $800... that's all the specs that I got off the guy. It's possibly/most likely used. Would there be a difference in performance between the 4" HKS that Trojan are offering for $949 (fitted)?

Link to comment
https://www.sau.com.au/forums/topic/160599-exhausts/page/2/#findComment-3087942
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...