Jump to content
SAU Community

Recommended Posts

Hey guys!

Digging up even MORE stuff from my previous ride. This time I have a pair of VDO Dayton HPC1700 MAKE AN OFFER!

These were stripped from my Celica to put other splits in because they were too heavy to stay in the door.

They're both in working order, as I've tested it myself just this evening!

Tweeter/Woofer: ø 25/165 mm

2-way System Impedance: 4 ohm

Max./Nom. Power:

300 Watts/150 Watts

Frequency Response:

45 Hz – 20 kHz

Crossover frequency:

3800 Hz/12 dB

post-34609-1174043286.jpg

post-34609-1174043385.jpg

I'm asking for $180 for the lot.. but please! make me an offer!

PM me..

EDIT: "Splits"

Edited by S T A R 3 3
Link to comment
https://www.sau.com.au/forums/topic/160713-fs-2x-vdo-dayton-splits-hpc1700/
Share on other sites

  • 5 weeks later...
  • 2 weeks later...

Hi guys! I've been having internet issues.. where I can't post new topics or PM people on SAU.. its weird.. I can write 'fast replys' but if its over 'x' amount of words, it will just time out..

i cant access myspace, MSN/messenger..

This is the only way I know how to advertise what I have for sale: and yes, THE SPLITS ARE STILL FOR SALE!

Just wanted to give you a heads up before I post this anywhere else.

I'm selling my JVC head unit for $700

I initially bought it for around $1200-1300 a few months ago (February?) and installed it on my 33 and runs like a dream.

Click here for features

JVC-%20KW-AVX700.jpg

Edited by S T A R 3 3
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...