Jump to content
SAU Community

Recommended Posts

Hi guys,

FOR SALE = Custom Stainless dump pipe with screamer pipe. Suitable for any RB20 or RB25 DET (turbo), ideal for upgrade from standard dump pipe. Made from 304 stainless steel by automotive craftsmen engineer. Allows more flow and less lag from your turbo, as well as more performance at the wheels (Approximately 5kw to rear). The part was installed on the car for a week but selling due to turbo upgrade. There are no leakages or damage to the pipe, in perfect nick. Screamers allows to give the car its extra raw in top end, with perfectly engineered custom 3inch dump pipe suits T3 flange. The dump pipe has the oxygen sensor fitting, and bolts to standard engine with seperate pipe for screamer off the wastegate. Comes with all gaskets and bolts, and fits directly with no leakages.

Price: $250 and postage at buyers expense

Located in Sydney NSW, either PM or contact me by email on [email protected].

Can organise shipping interstate!

Cheers

post-35801-1174143809.jpg

Link to comment
https://www.sau.com.au/forums/topic/160830-fs-rb25det-dumpscreamer-pipe/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...