Jump to content
SAU Community

Recommended Posts

there have been debates on wether or not the R34 GTR bonnet will fit onto a Gtr GTT. if anyone has any infomation on it please point me in the right direction

if it does not fit what will need to be done in order to make it fit.

my other option is to cut a standard GTT bonnet into the shape of a GTR inorder to fit a special bonnet lip i have ordered.

any thoughts guys?

Link to comment
https://www.sau.com.au/forums/topic/161005-gtr-bonnet-on-gtt/
Share on other sites

HAHA no dramas, speak to LINK international in QLD they are the Aussie NISMO distributor.

If they cant give you a number let me know and i will talk to nomuken and get the part number for you.

Edited by URAS
HAHA no dramas, speak to LINK international in QLD they are the Aussie NISMO distributor.

If they cant give you a number let me know and i will talk to nomuken and get the part number for you.

no idea if this is even their site but cant seem to find a no. http://www.linkint.com.au/

Edited by anDru
there have been debates on wether or not the R34 GTR bonnet will fit onto a Gtr GTT. if anyone has any infomation on it please point me in the right direction

if it does not fit what will need to be done in order to make it fit.

my other option is to cut a standard GTT bonnet into the shape of a GTR inorder to fit a special bonnet lip i have ordered.

any thoughts guys?

it will fit in a physical sense however the bolts and hinges do not fit and line up properly so you will need to buy new bolts and hinges to fit the gtr bonnet to the gtt, nissan sell these so give them a call, hope this helps

no idea if this is even their site but cant seem to find a no. http://www.linkint.com.au/

No stress i have just contacted URAS and they are getting me the Part number for the fill panel. I will also hold stock as this is becoming ever frequently asked.

it will fit in a physical sense however the bolts and hinges do not fit and line up properly so you will need to buy new bolts and hinges to fit the gtr bonnet to the gtt, nissan sell these so give them a call, hope this helps

so theres no such thing as a direct fit? what would i ask nissan if i really did need the hindges and bolts? "do u guys have a price on the R34 GTT Bonnet Hinges and bolts"

so theres no such thing as a direct fit? what would i ask nissan if i really did need the hindges and bolts? "do u guys have a price on the R34 GTT Bonnet Hinges and bolts"

R34 GTR hinges are approx $70-80 each

Will need 4 8mm nuts to fit bonnet

Will also need a GTR bonnet catch $70-80

May also need GTR bonnet catch support $70

Prices will vary, depends if you get trade price or not

I found all this out fitting a R34 GTR front to my Stagea

I tried to use R34 GTT parts first, but they did not work.

will someone have these things or would i have to order from nissan?

hia mate if ya wanna fit a r34 gtr bonnet to a r34 gtt you will also need to fit front bumper and front wings (fenders) for it all to line up i have a gtt with full gtr conversion so i no heres some info for ya prices are in pounds sterling dont no what it is in aus dollers

26040AA300 028718/BRACKET ASSY . headlamp bracket £21.56

26090AA300 028718/BRACKET ASSY . headlamp bracket £21.56

65400AA400 HINGE ASSY HOOD WAS £31.67

65401AA400 HINGE ASSY HOOD WAS £31.67

BONNET HINGE YES THE BONNET HINGES ARE DIFFRENT

62240AA00 RETAINER FRONT WAS £36.07 BRACKET FOR BONNET CACH AND HORN

63120AA400 STIFFENER FRONT WAS £56.03 WING RUNNES THE ONES TO FIT THE WINGS TO THE INNER WINGS

63121AA400 STIFFENER FRONT WAS £56.03

The wheel arch liners, wont fit with the new panels on but they can be made to fit.

Unless you buy a new bupper renforment bar, you will have to modify your one, you need to cut away the bottom side of it to allow it to fit into the bumper!

REAR WINGS IF YOU WANT THEM

N78100AA436 FENDER REAR RIGHT HAND WAS £363.51

N78101AA436 FENDER REAR L H WAS £363.51

N78830AA400 LID GAS FILLER PETROL CAP £56.78

Hope that helps mate big job like cheers marty.

um.... i fitted ours in about an hour with none of the above listed parts..... and its picture is on every DRIFT branded gauge box around the country for proof. Yes you need to mod the hinges but anyone with half a clue can do it without buying new hinges..

Edited by URAS
hia mate if ya wanna fit a r34 gtr bonnet to a r34 gtt you will also need to fit front bumper and front wings (fenders) for it all to line up i have a gtt with full gtr conversion so i no heres some info for ya prices are in pounds sterling dont no what it is in aus dollers

26040AA300 028718/BRACKET ASSY . headlamp bracket £21.56

26090AA300 028718/BRACKET ASSY . headlamp bracket £21.56

65400AA400 HINGE ASSY HOOD WAS £31.67

65401AA400 HINGE ASSY HOOD WAS £31.67

BONNET HINGE YES THE BONNET HINGES ARE DIFFRENT

62240AA00 RETAINER FRONT WAS £36.07 BRACKET FOR BONNET CACH AND HORN

63120AA400 STIFFENER FRONT WAS £56.03 WING RUNNES THE ONES TO FIT THE WINGS TO THE INNER WINGS

63121AA400 STIFFENER FRONT WAS £56.03

The wheel arch liners, wont fit with the new panels on but they can be made to fit.

Unless you buy a new bupper renforment bar, you will have to modify your one, you need to cut away the bottom side of it to allow it to fit into the bumper!

REAR WINGS IF YOU WANT THEM

N78100AA436 FENDER REAR RIGHT HAND WAS £363.51

N78101AA436 FENDER REAR L H WAS £363.51

N78830AA400 LID GAS FILLER PETROL CAP £56.78

Hope that helps mate big job like cheers marty.

um.... i fitted ours in about an hour with none of the above listed parts..... and its picture is on every DRIFT branded gauge box around the country for proof. Yes you need to mod the hinges but anyone with half a clue can do it without buying new hinges..

this is wat i want to know. what do i need to fit a GTR bonnet????? if its just hinges then tahts fine but if i have to start playing around with fenders and replacing other crap then i wont bother.

can someone please confirm this?

d6.gif

It seems to be missing the bonnet hinges. I can not tell from that angle

The GTT hinges mounting holes for the bonnet are too wide apart to suit the GTR bonnet

You will need to make the hinges wider by about 20-30mm to pick up the GTR bonnet studs.

The bonnet catch is the same for the GTT and GTR, but the GTR one has a shorter safety release lever. If you use the GTT one you will need to cut it down approx 20mm

Not sure about guards, but if the GTR bonnet is wider or narrower to the GTT then you will need guards aswell, along with front bar and all the other reo parts and brackets which cost heaps.

this is wat i want to know. what do i need to fit a GTR bonnet????? if its just hinges then tahts fine but if i have to start playing around with fenders and replacing other crap then i wont bother.

can someone please confirm this?

You'll need to replace the gaurds and frontbar.

Just buy an Eastbear bonnet, its a GTR bonnet that fits GTT's.

You'll need to replace the gaurds and frontbar.

Just buy an Eastbear bonnet, its a GTR bonnet that fits GTT's.

No you do not need gtr guards or front bar. just gtr hinges, bonnet catch and catch support and a gtr bonnet. thats it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...