Jump to content
SAU Community

Fitting Rims Onto R32 Gts-t

r32line

By r32line,
in Exterior & Interior Styling

 Share

Recommended Posts

Rekin Grand Master

Rekin

Posted
Posted
Yeah trust me, I've been there before..fell in love with a set of wheels, spent many weeks searching on yahoo auctions for it, finally found it, took me more than 9 weeks to get it here..then found out it didn't clear calipers, tried slip on spacers..dodgy..had custom made bolt on spacers...made my wheels vibrate at high speeds...in the end gave up and sold the wheels and bought ones that fitted nicely...

My high speed vibration were fixed with a simple wheel alignment and balance. No more vibrations at all :)

nizmokid Mentor

nizmokid

Posted
Posted

I Had spacers on my R33 when I bought it, and the standard studs on it only did up a few turns.....not enough thread. I ended up getting engineerd longer studs for the front to make it safe. Also they shaved the Nissan off on the front brakes to make clearence........bloody fags!.....don't go to LA performance in VIC.

and only a year ago I bought a set of Volk GT-C's 18inchs for my line and the fit was perfect....the right offset.

filled the guards and looked heaps better too!

don't use the wrong offset wheels.

  • 2 weeks later...
r32line Mentor

r32line

Posted
  • Author
Posted
sorry to hi jack this thread i just got a set of 18 inch gmax rims on my line. they seem to fit but the only problem is that there is a tiny clearance between the front brakes and rim (gap is 1.5 to 2mm). should i be worried?

Not at all, if there is a gap theres a gap, if it does not scrape then u have no problem. The wheel stays a fixed distance so aslong as it has some clearance there is no problem...

r32line Mentor

r32line

Posted
  • Author
Posted

Spacers are illegal. I don't like that idea personally. Get soneone to hop in car and have it roll past you while you stand on the side of the road. If you hear is scraping then you have an issue. Get someone to profile the word nissan down like 0.5mm to be safe if you want.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...