Jump to content
SAU Community

My New Radiator

Strik3r

By Strik3r,
in Queensland

 Share

Recommended Posts

Strik3r Experienced

Strik3r

Posted
Posted

so i managed to limp my car up to andy's to get a new radiator installed. As is always the case with these things, nothing went quite to plan :)

Firstly, in the r33's, does anyone know what the temp sensor that goes into the bottom of the rad is for.. well obviously its measuring temp, but it doesnt seem to controll anything as the guage temp sensor is in the engine...... Atm we've left it disconnected but i wouldnt mind knowing what its supposed to be doing. Perhaps it controlls the secondary fan ?

When installing the radiator, we ran into a problem.. the mounts at the top of the radiator didn't line up properly..... solution ? ZIP TIES !!

anyway, will obviously try and sort out some new mounts in the next week or so. Shouldn't take more than a few minutes with a drill.

Will let you all go how my new tune goes tomorrow.

big thanks to bunta for the huge help he gave putting this in.. legend !

post-33895-1174567202.jpg

post-33895-1174567207.jpg

post-33895-1174567211.jpg

Link to comment
https://www.sau.com.au/forums/topic/161513-my-new-radiator/
Share on other sites
Bunta Grand Master

Bunta

Posted
Posted
What type of radiator did you purchase?

One of those generic chineese ones that Just Jap sells

It didnt fit my R32 properly nor did it fit the R33 properly so who knows what it is for! But it works and mostly fits so for a sixth of what you pay for a big name one I reckon it is still alright!

Link to comment
https://www.sau.com.au/forums/topic/161513-my-new-radiator/#findComment-3000233
Share on other sites
95SKY Community Regular

95SKY

Posted
Posted
One of those generic chineese ones that Just Jap sells

It didnt fit my R32 properly nor did it fit the R33 properly so who knows what it is for! But it works and mostly fits so for a sixth of what you pay for a big name one I reckon it is still alright!

Handy to know, If you dont mind me asking how much did it cost?

Link to comment
https://www.sau.com.au/forums/topic/161513-my-new-radiator/#findComment-3000631
Share on other sites
Ryan.R34 Community Regular

Ryan.R34

Posted
Posted
so i managed to limp my car up to andy's to get a new radiator installed. As is always the case with these things, nothing went quite to plan :kiss:

Firstly, in the r33's, does anyone know what the temp sensor that goes into the bottom of the rad is for.. well obviously its measuring temp, but it doesnt seem to controll anything as the guage temp sensor is in the engine...... Atm we've left it disconnected but i wouldnt mind knowing what its supposed to be doing. Perhaps it controlls the secondary fan ?

When installing the radiator, we ran into a problem.. the mounts at the top of the radiator didn't line up properly..... solution ? ZIP TIES !!

anyway, will obviously try and sort out some new mounts in the next week or so. Shouldn't take more than a few minutes with a drill.

Will let you all go how my new tune goes tomorrow.

big thanks to bunta for the huge help he gave putting this in.. legend !

If it has a butterfly nut on it that's the drain plug on the bottom, and the top mounts just flip upside down and reverse the rubber rings, drill 2 holes in closer to the middle if you need it :sorcerer:

Link to comment
https://www.sau.com.au/forums/topic/161513-my-new-radiator/#findComment-3001752
Share on other sites
95SKY Community Regular

95SKY

Posted
Posted
If it has a butterfly nut on it that's the drain plug on the bottom, and the top mounts just flip upside down and reverse the rubber rings, drill 2 holes in closer to the middle if you need it :sorcerer:

I replaced my radiator for my old 33 it was a direct fit, isnt the plug at the bottom a coolant temp sensor?

Link to comment
https://www.sau.com.au/forums/topic/161513-my-new-radiator/#findComment-3001840
Share on other sites
Bunta Grand Master

Bunta

Posted
Posted
If it has a butterfly nut on it that's the drain plug on the bottom, and the top mounts just flip upside down and reverse the rubber rings, drill 2 holes in closer to the middle if you need it :sorcerer:

:kiss: thats what I suggested to him!

I replaced my radiator for my old 33 it was a direct fit, isnt the plug at the bottom a coolant temp sensor?

I just found out that the little sensor in the stock radiator is for the fan apparently it only operates when really extreme temps are reached..the temp sensor for the guage ect are on the engine

Link to comment
https://www.sau.com.au/forums/topic/161513-my-new-radiator/#findComment-3001987
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...