Jump to content
SAU Community

Opinions On This Colour

NISMO

By NISMO,
in General Automotive Discussion

 Share

Recommended Posts

NISMO Grand Master

NISMO

Posted
  • Author
Posted (edited)
6624953.jpg

This BLUE would be a different story though :( Its on carsales in NSW under dealer cars..there's quite a few in Australia at the moment..might be worthwhile looking interstate as well instead of straight from Japan.

That's the same blue I think.

Looks really good there, but again I've seen it in some shots on a dull day and it looks quite dull.

As for looking here, would love too, but current prices are on average 10k more than what it would cost to get the car from Japan.

eg a 2005 auto went for just over 2mil yen last week. That's around 36k ready to drive, rego and all. On sites like carsales a 2005 auto is going close to 50k. Big difference!

Edited by NISMO
n15m0 Grand Master

n15m0

Posted
Posted
That's the same blue I think.

Looks really good there, but again I've seen it in some shots on a dull day and it looks quite dull.

You reckon? This one looks more like bayside blue to me...I could be wrong..bloody sun :( I have seen one in bayside blue in the flesh before and looks way hot!

NISMO Grand Master

NISMO

Posted
  • Author
Posted
You reckon? This one looks more like bayside blue to me...I could be wrong..bloody sun :( I have seen one in bayside blue in the flesh before and looks way hot!

yeah pretty sure, the Carribean blue is the only colour close to that, the other blues they came in were quite different, Check out the front bumper, it's quite close to the other pic.

JUNR34 Community Regular

JUNR34

Posted
Posted

Mate IMO just take your time and find one with the colour you really like, for me I would go for black as well. Cause somewhere down the track say if you're not happy with the colour a respray aren't going to be cheap haha. Also just import it from Japan since you can find these in mint condition, you can get a nice set of 18s from the money you save.

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

^ i like that idea. Save money by importing, use saved money on some 18" hotness.

black FTW. Saw one in the states with the kit, little rear spoiler, etc... looked awesome i must admit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...