Jump to content
SAU Community

Recommended Posts

I'm looking ahead into the future thinking about what I need to be getting first etc.

At the end of the day I'm planning on having the following mods on my car:

Full 3" exhaust

FMIC

Pod

Standard turbo

No boost controller (just whatever comes from having the exhaust)

Will I be safe going for the Apexi SAFC NEO?

Since they're pretty basic mods will adjusting the air:fuel ratios be enough to give me a safe tune with no knocking etc?

At what level of mods/boost/power does the timing go retarded? (I don't know much about this which is why I'm asking because I know the SAFC can't adjust timing at all)

Edited by so_tred

a safc IS a piggy back as far as i know,

maybe you're confusing piggy back with standalone?

i'm not extremely well informed on skylines yet but my guess is that you would be fine with a neo with those mods... especially if you're not going to touch the boost at all....

if you are not going to increase the boost then I don't see why you would need the larger intercooler when the standard side mount can more than handle the tiny increase in boost from the exhaust mod. Piggy back like the SAFC or SAFC2 should be enough to clean up the curve. Yes you will get people telling you to get a powerFC and that it is better yadi yadi ya...........but since you are only going to do the exhaust mods then it would just be overkill to have a powerfc.

But if you are going to doing more mods later on then yes.....go with the powerfc

Sorry, cleared it up a little. I meant piggyback as in the GReddy Emanage or something similar.

PowerFC is out for me anyway as it's an auto.

The FMIC is there because in the more distant future I probably will chase more power & get a bigger turbo etc..and let's face it, I like the look of them :P So I'm just doing it now instead of later.

Edited by so_tred

what he said ^^^^^

u should only see about 10psi max, in the coldest weather, with free flowing exhaust. so R&R wont be a prob.

cleaning up your AFR's will get you more power, and maybe better economy.

I use a unichip, they're cheap to pick up these days, they control afr's and timing. mine also has a boost controller module that uses the stock solenoid to control boost. very stealthy :P But you need to find soemone who tunes unichip. most tuners wont / dont tune them. Ive got a great place in sydney (C&V Performance), but that doesnt help you.

on the other hand, safc will do the basic afr's for you. anyone can tune those.

yeah everyone hates them. but then u find soemone thats been tuning them for years, and they get the best out of them.

but it seems irrelevant to this thread now since the thread starter has clarified a few things.

edit: but you cant tell me u'd go with an safc, over a unichip. that was my point, after reading the original topic question.

Edited by Munkyb0y

Be careful, SK has mentioned that some R34 GTTs hit R&R at 9psi.

After an exhaust, you should be fine, will probably get a tiny flat spot around 5000, but only a very tiny one. I did.

Also a FMIC will bring the boost a little higher as well, so by then you'd prob get R&R and a bigger flat spot. This is partly why I havent put on a FMIC.

Check around this other R34 GTT owners to see what their experiences have been. Let us know how you go. I've subscribed to this seeing as the findings in this also affect my mod plans.

I would say a SAFC would be fine enough for what we want, especially with the stockish level of boost.

Note: I dont think the car will be knocking much with an exhaust and FMIC, the standard ECU should provide protection against that by hitting R&R. I think what you want to do is get the most from the exhaust and FMIC without hitting R&R, and thats where the computer comes in. Chances are a badly tuned computer will be more likely to knock than one with the standard ECU only. (i might be wrong hahah)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...