Jump to content
SAU Community

Sudden Alarm Issues

dezz

By dezz,
in Car Audio & Electrical

 Share

Recommended Posts

dezz Grand Master

dezz

Posted
Posted

The alarm on my car started playing up the other day out of the blue...

When I arm the alarm now, it leaves the doors unlocked, so they need to be locked manually with the key...obviously if you open the door the alarm sets off, so its all working fine, other than the fact that it won't lock the doors upon arming...

anyone got any ideas as to what the problem is?

Easy fix?

cheers

Link to comment
https://www.sau.com.au/forums/topic/162185-sudden-alarm-issues/
Share on other sites
raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Pull the trim off and check if when you arm the car that the door locking motor is working. If not, pull it out (takes about 30 sec to do), get a replacement from any car audio / security shop and replace.

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Nah this sounds exactly what happened to me a while back. Keys would lock doors fine but when I used the remote sometimes it did, sometimes it didn't. Replaced motor and all was well.

The central locking motor I'm talking looks like the pictured below. (just make sure you get the one with the correct number of wires, they usually come in 2/5 wire versions).

Msk1000web.jpg

msnismo Grand Master

msnismo

Posted
Posted

Mine had this issue... the motors were weak.

The mounting position of the motors was not the best and it caused the motor to be over extended and eventually ineffective.. The key overrides the motor along the orignal clips hence why you can lock it with a key.

New motors are about $20 from memory... make sure it is mounted correctly too!

dezz Grand Master

dezz

Posted
  • Author
Posted

Ok...so I found I had one of those motors left over (they use the same 1 for boot release apparently but my installer said he didn't want to use it for that as it would fail regularly)

So I took off the door trim...I didn't even find 1 of the motors pictured above....all that was in the door looked to be factory stuff...So I basically stood there looking at stuff...poked around etc...decided I had no idea what I was doing and gave up....plugged the window control switch etc back in, armed the alarm, and bam...the doors lock now....So I fixed something...I just have no idea what exactly :(

RANDY Veteran

RANDY

Posted
Posted

If the motor was weak, and the rods were catching on your doortrim or something, then that would stop it from working.

To explain further on what the other guys were saying.. if you lock the drivers side door, you're overriding the motor for that door, but the passenger door gets the signal to lock/unlock when the drivers one is locked/unlocked... even if done manually.

Same way that if you lock the drivers door from the inside, the passengers side will lock automatically.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

you have a S2 correct that would mean you had hte keyless option. if so tey would have used the OE actuator. I would backtrack where it was tied in and check for a loose connection. if you cnat win go see keith and get him to sort it out.

dezz Grand Master

dezz

Posted
  • Author
Posted

Yep, series 2...and the key it came with had keyless entry on it...Since installing the alarm I've just been using the nismo key, and the remote to open doors obviously...

I played around with a few wires in there, and it seemed to work....then died shortly after.

Just a suspicion/thought, the passenger door lock button on the drivers side window controls, I remember when the installer did the alarm, that button no longer locked/unlocked the passenger door anymore....now that the remote is failing to lock/unlock the doors, that button is working again....

When I pulled the trim off, I obviously had to disconnect the plug that controls that button and the wipers etc...The doors didn't lock from the remote until I reconnected that plug...Is there a chance its got something to do with that? If I was to cut the wire that controls that door lock button, any chance that would solve the issue?

HUNTZ Contributor

HUNTZ

Posted
Posted

Yeah I think i'm going to have to do the same. Weird mine was working fine until I tried locking doors while the timer was still running. Doors unlock by remote just don't lock. Sounds like we got the same problem, I'll let you know whats up with mine when I get it sorted...

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      gauge needle removal

      By JC71 · Posted

      I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Roy
      A Boy's Love For His Rb20

      By Roy · Posted

      Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • GTSBoy
      gauge needle removal

      By GTSBoy · Posted

      Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • GTSBoy
      Wheel refurb?

      By GTSBoy · Posted

      Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • GTSBoy
      R-chassis INNER tie rod torque spec?

      By GTSBoy · Posted

      Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...