Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

About half way through reading the judgement at present.

Although Bob hasn't done us any favours with regards to track maintenance etc, it seems he may not be the villain in this whole scenario after all.

If you have a few hours to kill, have a read here.

http://www.courts.sa.gov.au/judgments/Judg...02-SASC-111.htm

Only skimmed & read 2/3 of the case facts but dodgy accountants :pirate:, Nowak should know better than that. They deal with contracts all the time & from what I can gather he [Nowak] should have consulted more with lawyers & even a conveyancer in creating that contract & other particulars.

Only skimmed & read 2/3 of the case facts but dodgy accountants :), Nowak should know better than that. They deal with contracts all the time & from what I can gather he [Nowak] should have consulted more with lawyers & even a conveyancer in creating that contract & other particulars.

Later on the judge basically suggests that half the paperwork he's provided was not actually prepared on the dates he says it was, and says it's pretty much one step from fraud. Gives him nil credibility.

These matters are in my view the main pointers showing a complete lack of credibility in Mr Nowak. Wherever there is any other evidence relating to one of the main issues of the case I would prefer that, to the evidence given by Mr Nowak.
so whats Mr Nowak's interest in the whole saga
To put it simply Nowak was the sole director (ie. agent) for Adelaide International Motorplex Pty Ltd (ie. the proposed company to eventually own AIR) & Russo & co were to be primary shareholders of the company. As the agent for AIM Pty Ltd, Nowak was trying to form a contract with B Jane which he botched up due to not meeting the simple requirements of what constitutes a valid contract.

Looks like Nowak only ever got Bill Russo involved once he'd farked the whole thing up already.

The judge said he felt sorry for Russo and his associates due to being used by Nowak to try and get out of a mess.

I can see just by the small mentions of him in the judgement that Bill Russo is a very smart businessman. (if his success didn't already suggest that)

Things like the requirement of a "clean" company with no trading history for him to be involved in the venture.

Sounds like it would be best for us all if he were to end up owning the track, but these proceedings won't end up that way. Here's hoping that an alternative can still see him end up with it.

Here's a brief rundown of the whole saga copied from another forum:

Back in '99 Bob Jane was approached by ANDRA to buy AIR, he declined to sell but later decided to sell to the owners of City Dismantlers, the contracts were made up & all was good, but good ol bob decided to pull a shifty & changed the contract without notifying the buyer to the extent that he excluded the carpark from the sale, thereby making the track useless. Because they were'nt informed, the buyer signed the contract believing it to be the original & paid the deposit, then bob's dodgieness was discovered & the buyer tried to pull out of the sale - so bob took him to court for breach of contract (yes, he is that big an asshole).

It would seem that even if bob looses the court case all that will happen is that the buyer will get his shirt back & bob will keep the track (unless the case goes very well & bob is forced to honour the original contract), if bob wins he keeps the track & deposit & laughs for a long time.

There was a rumour that TOLL was going to buy the site for a transport depo, but is was found that good ol bob had used aspestos as filler in the mounds (probably took a large some of money from someone to dispose of it), so the cleanup was going to be to expensive.

As it stands now the court case has been heard & the judge is considering his verdict - which may be announced tommorrow or in 2 years time, no-one knows.

There is currently a push by ANDRA to ignore AIR & establish a new strip in SA, but it is in it's early stages & probably won't come to anything for a good many years.

Basically, SA drag racers are screwed unless we get a miracle.

I'll be signing that petition & telling everyone I can to do the same.

Edit - another point is that even if the track does change ownership, it's stuffed, those wonderfull aspestos filled mounds didn't have any drainage condidered, so water has got under the track & turned it into a rollercoaster as well as rotting all the wiring for the timing system & lights. It'll have to be torn up, the drainage sorted & a new strip laid before it's usefull for anything more than streeters.

Well I don't know which 16 year old tool wrote that dribble above, but that is not how I read the judgement at all.

Bob Jane signed a sale contract for 4 Certificates of Title, which did not include fixtures and fittings located on the property. 'Dodgey' Nowak later tried to get the other CT on the estate included in the sale as well as various fixture and fittings, which do not actually form a part of the property. This is not how contract law works - not even close. There are also going concern and GST issues, which are complex, but Nowak is essentially trying to get out of paying GST by buying the 'business', which Bob Jane clearly never intended him to do - he was only selling the land. The business is a separate issue entirely.

Bob Jane is actually the defendant here and as I read the judgement, he has done the right thing. Nowak is a crook (which the judge all but says) and is the one being deceitful. I can't actually believe Nowak could be so plainly stupid as to even let this get to court - as it is clear as day that he has fabricated evidence, he is knowledgable in the field of buying and selling properties so he knows all the procedures and rules, and he hasn't got a leg to stand on. As far as I read Bill Russo has had almost nothing to with the whole thing - he only became involved long after the issues with dodgy companies changing names and issuing bonds to raise capital came along.

Either way it sucks, and the judge should not allow an appeal (they can't possibly win), and make it all go away so new contracts can be negotiated and the place sold and fixed up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...