Jump to content
SAU Community

Increasing Track Width Using Spacers

EnricoPalazzo
 Share

Recommended Posts

EnricoPalazzo Grand Master

EnricoPalazzo

Posted
Posted

Will increasing the track width on my s15 front and rear have a positive handling effect or not. Looking at around 10mm increase.

Car is s15, rims are standard 16inch, 6.5wide. Mods to sus are coilovers and adj strut bars.

Using bolt on spacers obviously not slip on ones.

Cheers

jeffworld2 Veteran

jeffworld2

Posted
Posted

as far as i understand it, you may start breaking shit because you have moved the centre of the wheel out, and it increases the length of the 'lever' to the chassis, which will put bigger forces on your suspension and mounts.

of course i cant tell you how much of a difference it will make strngthwise, but i assume this is why they are not allowed under adr's. it will make a difference to handling but yeah will it be noticeable with only 10mm each side?

shozbot Collaborator

shozbot

Posted
Posted
Looking at around 10mm increase.

Using bolt on spacers obviously not slip on ones.

Cheers

You won't find bolt on spacers in 10mm, there wouldn't be enough meat to allow for the nut recess. The thinnest I've seen are 20mm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • sunsetR33
      RB26 turbo oil banjo bolts

      By sunsetR33 · Posted

      Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Dose Pipe Sutututu
      RB25DET Series 1 & Series 2 Gearbox Identification

      By Dose Pipe Sutututu · Posted

      Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
    • Dose Pipe Sutututu
      RB25DET NEO Cylinder Head

      By Dose Pipe Sutututu · Posted

      Yeah I spent close to a year finding one. I was even tempted to buy a RB25DE N/A head and port it out. That latter option, could still be an option.
×
×
  • Create New...