Jump to content
SAU Community

Recommended Posts

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I was eyeing off a spare 6spd Hollinger with magnesium bell housing off Gibson car. Kept telling myself that it would be right at home behind my little RB20 :)

Does anyone have any idea how the lap times at EC and PI compare to the times the cars did back in 89-90?

The category webiste has a great picture of the Skaife car (not sure if Terry still owned it at the time) going sideways at what looks to be turn 2 at Wakefield. I have it saved on my work PC. Anyone got the pic im thinking of?

Also one from between turn 3 and 4 at EC (up over the hill) where the R31 is splitting flame and being chased by the HRT VL :)

Anybody have any other info on this historics weekend?

It's funny, I've never liked the look of the 31s because of the guys that run em around Newcastle, but after looking at these pics I realise that these boys are just turning a great car into an abomination :)

Anybody have any other info on this historics weekend?

It's funny, I've never liked the look of the 31s because of the guys that run em around Newcastle, but after looking at these pics I realise that these boys are just turning a great car into an abomination :)

31gun should be able to provide us with the info

monkeykplunk, fair call mate

unfortunately plenty of deadshits buy the aussie model r31 sedans

because a) they are cheap and b)they are great value for money

but yeah, guys put shit rims on them, shit paintjobs etc etc

saying that, plenty of nice 31s out there too

even some nice coupes up there in newy

avagoodone, mark

That Beaurepaires car is actually Rod Marklands car(chassis #1)

That was after GMS sold it to Chris Lamden (sic?).

Then Terry bought it and repainted it in Nissan colours.

Then he bought Richo's 1990 car (chassis #5) and sold chassis #1 to Rod.

As for historic racing, you can get anything and everything at these meetings.

I've seen Ferrari F1 cars (1.5L turbo), Honda F1 cars, Tyrell F1 cars.

Porsche 935's 962's 917's 908's.

Ford F40's (real ones) Lola's open wheel & sports.

Buick straight 8's, Corvette specials, cars with lever arm shocks and giant finned drum brakes.

Cars where the driver sits right next to the fuel tank, where the drive is via twin chains from a rear mounted diff...

I could go on for some time.

Hooks

roy anmy chance you can post up that pic you speak of?

or email to [email protected]

cheers, mark

I want to do an article for the monthly cub newsletter. So will get a few pics off to you. Next week i will be doing my best to beat him in a 80hp Mk I Cortina. LOL im no chance against his BDA Escort :yes:

But it looks a whole lot Rod and Terry's car :P

As for historic racing, you can get anything and everything at these meetings.

I've seen Ferrari F1 cars (1.5L turbo), Honda F1 cars, Tyrell F1 cars.

Porsche 935's 962's 917's 908's.

Ford F40's (real ones) Lola's open wheel & sports.

Buick straight 8's, Corvette specials, cars with lever arm shocks and giant finned drum brakes.

Cars where the driver sits right next to the fuel tank, where the drive is via twin chains from a rear mounted diff...

I could go on for some time.

Hooks

I was thinking more about where and what time and price etc when I asked for more info :yes:

But that all sounds pretty sweet anyway and has got me excited to see all this.....

Here are a few pics i stole of the the #9 ANZ Rouse/Moffat Sierra from 1987 that is back in NSW. It seems the owner is planning on restoring it

sierra20.jpg

Sierra13.jpg

There was also a guy that was floating around on SAU for a week or two looking for information on the Murray Carter NetComm DR30 that he had just purchased. I seem to think he started restoring it around Nov 2005. I wish i had the cash to buy the DR30 that is for sale in Melbourne at the moment. The asking price seems reasonable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...