Jump to content
SAU Community

Recommended Posts

thanks,will probably go for a SAFC or a good ecu,thinking the greedy or power fc,also looking at getting a oil catch can with some good quality speedflow fittings so i can get rid of those oil vapors that are a common problems for RBs when getting more power.

dont go half assed on the SAFC, although it looks cool and yeah will provide a bit more power the fact is a proper setup ecu will far outway the price and performance cost. Ihad an SAFC sold it and bought a new ecu. standard to SAFC was good..... SAFC to new ECU WAS AWESOME!

  • 1 month later...

was watching the ignition dvd and they had a review on EMS,was thinking of going ems,i have heard that they run the auto's very well.on the review,stock standard evo 8,made 186kw at all fours wheels with just exhaust and pod,with EMS tuned,power went up 224kw at all fours wheels,not bad. at the moment with 195kw at the wheels,i am sure i can get to about 215 to 230kw at the wheels with the ecu,just want to know peoples thought?aslo,well done to all the skylines at drag warz on the weekend,finally people in the east might take notice of us,lots of skyline running in the 12 to 11 sec zone know in perth,well done :blink:

cheers dude,the highflow turbo is rated to about 350hp at the wheels,with the stock turbo i got about 260hp at the wheels,so i have got i bit to go,going for about 330hp at the wheels with a safe tune,also will do what you have and modify the auto gearbox as well!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...