Power FC Chart Mapping

[BOOSTD]

Here is the Excel file I used to map my Fuel and ignition tables. I am sure some of you guys out there can get some use out of it. I recently had Mick from subzero Dyno my car. You can clearly see the fuel he took out of it at PFC load Value 15-16. The car was being retuned at 1.10bar. The Ignition points around 15-16 need to be trimmed at peak torque to reduce detenation. Did make 225kw tho. When the timing is retarded I think it will negate the extra boost and all I`ll end up with is a slight increase in mid range power only, probably actually loose some up top.

[BOOSTD]

The extra Fuel Very low in the rev range is for smooth idle. That's what happens when you remove the mesh from the air flow meter. Its does get a tad confused at idle.

[Steve]

Is this from the fc-datalogit software, or did you go through and write out the individual values your self?

cheers

Steve

[BOOSTD]

I wish it was from the software. I made it up myself. I have only seen Datalogit for GTR in Adl so far. sorry =(

[Jay95R33]

Well done - thanks for this. I can see you've put a few hours into it

What are your mods?

Just so we know what the PFC was mapped to.

Cheers

J

[Steve]

thanks for posting it up, I was sort of hoping datalogit had finally got their shit sorted with a gtst version. Probably almost more work putting together the charts than the acutal fc programming!

[BOOSTD]

HKS Super Dragger Ex

HKS Dump Pipe

mesh removed from A/F meter (stock r33)

Apexi Air filter /partitioned off

Greddy 28c tube and fin front mount intercooler

Heat wrapped turbo to cat*

*cat in pipe

heat wrapped intake pipe

Power FC

HKS solid twin plate clutch

Cut out front bar

Oil air seperator

Bosch Motorsport fuel pump

Motul 5w40 oil

Nulon G70 with auto trans fluid in the gear box

1bar to 1.10bar boost

HKS EVC4

Pureone oil filter

Stupidly huge fuel filter

BPES7??? plugs 0.7mm

BP ultimate 98 Fuel 1bar- with octane booster for 1.1bar,also another 2degrees added with octane booster.

I`ll modify this post if I can think of any more

[Steve]

225kw with stock turbo! 1.1bar with stock turbo!!!! you're a very brave man:)

[Sydneykid]

Thank's Boostd, that format looks so good I might load our numbers into it. Not much use comparing our RB20 or RB30 with an RB25, but interesting nonetheless.

[BOOSTD]

Fantastic. If one person gets some use out of it, it was worth posting.

[BOOSTD]

Originally posted by Steve

225kw with stock turbo!  1.1bar with stock turbo!!!! you're a very brave man:)

Your right on the money Steve, I only get near those figures with a healthy dose of octane booster and I still get a minor ping. I`m taking it down AIR for the next street meet. Fingers crossed I can get through another 6 passes.

[Steve]

Good luck, hope the turbo holds.

[Gav]

Thanks boostd useful info.

I actually leaned out the fuel map at idle to try and reduce exhaust fumes (I don't have a cat fitted). Hunts a bit now (I took the AFM screens out also), but less likely to gas myself whilst idling in a semi-closed garage.

I'll drop my maps in for the RB26 and post here also.

Anyone else got RB26 maps?

[VSPECII]

gav howd ya go with those maps dude

[Gav]

Been slack dude - will borrow the dictaphone from work and try and do this weekend.

[Busky2k]

Wow thats some pretty nice figures you got there dood! I hope I dont pull up to you at the lights!! haha

Dumb question, but isnt Subzero an interstate company?

[BOOSTD]

Yes, Mick now works for tilbrooks here in adelaide. Thats the guy from the serious performance 6 video

[grepin]

Its Greg from base. What do you reckon try loading your figures into my car. Where could I go wrong. Our cars have the same mods virtually. Mine has only had one tune for an hour on a 43degree day. So there is nothing to loose. I am planning a turbo upgrade in the near future so it will have a retune then.

[Steve]

BOOSTD, could you post up the raw date, might see how it compares to mine as well:D

Cheers

Steve

[BOOSTD]

hey greg, you can give it a go-might be an idea to compare the two and make sure there isn't a huge difference between maps. what works for me might make no pwr for you and blow ur engine.

Steve- is what ur after different to the file i already posted up top?