Jump to content
SAU Community

Recommended Posts

well I know for a fact that leewahs cars is driven quite a bit.

also my friends r33 with well over 350rwkw (rb26 with 2510's is an genuine daily driver he drives the thing in to towm to go to work. he might only be running .5 bar boost and havew the silencer in but it still doesnt get beaten in a traffic light gp. it is a very sweet and driveable car but guess what no rb 25/30 or big laggy turbo. this car did make 396 rwkw at a show last week end he is drivng it to heathcote today to try an improve his times. from a 12.4 at 125mph then on monday morning he will take it to work. also on a circut with equivelent drivers your r32 would have trouble keeping up and possibly beating it. as the car was built as a track car not a drag car.

btw I also believe ben and nigel drive there cars all the time

specs are here.

cheers

http://www.meggala.com/redr33.htm

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

Hi Meg, We have had GTR's with 2530's and what you say is right, very nice, everyday drivers, I imagine 2510's would be the same. But the "your friend" example proves what I said. I'll bet with the "silencer in" and the boost at "0.5 bar" it isn't making much more than 300 rwkw.

And it has $40K worth of mods, on top of what, $25K for a good R33 GTST? That's more than we spent on the R32 GTST and the R32 GTR added together. If someone did that and then sold it 2 years later they would get, what $20K? That's almost $25K per year in depreciation, shoot I could own a GT2 for that.

On a dry circuit, over 15 laps, I'll put my money on a 300 rwkw R32 GTST at 1,100 kgs to beat a 396 rwkw 1,400 kg R33 GTST everytime. I should add the R32 GTST averages 260 rwkw from 4,500 rpm to 7,500 rpm. Work out the averages on your friend's R33, it may make an interesting comparison. If it doesn't have a close ratio gearset to overcome any average power deficiency he's screwed, big time.

The R34 GTT with 260 rwkw did a 12.4 for 1/4 last time out, so maybe we should have a drag challenge as well. I reckon the R32 with 22% less weight and 15% more max power (25% higher average) would easy do a high to mid 11.

Sorry we got off the topic, whenever I talk to guys (honestly, with no BS) with more than 300 rwkw Skylines, they always do stuff like drop the boost, loose the race fuel, change the maps, the tyres, the exhaust etc. They never seem to drive it every day (including in the rain) with much more than 300 rwkw. Maybe there are, and I just haven't met up with them.

One last thing, the topic of this thread is "Budget $4k, Goal 300kw" it's hardly fair when we start using mods that cost 10 times as much to prove our case.

Hope that adds to the discussion.

I agree to diagree but any way that r33 is for sale @ 30 k the owner bought it built from japan so he didn't sell his right testsicle for the mods and it does have an osgiken gear set as well who would be silly enough to drive with the car making 300 rwkw plus in traffic etc thats why we have boost controllers btw Ihave driven a car with well over 350 rwkw (twin 2835's on a gtst) in traffic its very doable even wiht the triple plate. as long as you dont hit boost :P

as I said the 12.4 was with a 60' time of 2.4 he is at the drags today I'll let you know if he cracks the 11's which he should.

300rwkw for 4k I seriously doubt but I'll leave that to others. I have been looking at options and though I was once a fan of the rb25/30 set up I am now convinced about the rb 26 option. but thats just me.

meggala

Guest INASNT

I was thinking of going silly and going over 300rwkw but it would piss me off more than give me enjoyment coz going to and from work i hardly hit boost with my current setup coz of the peak hour traffic!

I am aiming for around 260-270rwkw so i can race gordo and wip his butt like i did last time:D

Oh and for the topic, $4000 and 300rwkw nope, try $10,000 for reliable 300rwkw

Hi Meg, "As long as you don't hit boost" is another reason for not going too far, but it is good for the soul to agree to dissagree. Check the cost on the RB26 vs RB30/25, especially if the RB26 needs a rebuild. And make sure you get all the necessary bits with the RB26, anything needed and missing costs an arm and a leg.

Why is the guy selling the R33? It sounds like a very well modded car with big bucks spent on it. He won't find another for that sort of money.

Good to exchange posts with you as usual.

well I believe 10k will see me with a stout rb 26

why is he selling well he has a very hard core r32 with twin 2835's hks dog box etc that he wants to refine and has another car as a run round I think he is nuts selling but thats me I'f I had the cash around I would buy it but I dont and really I dont desire 300 rwkw 200-220 should do me fine I'm to old for hard core racing any more been there done that

meggala

Hi MEg, 220 rwkw out of an RB26DETT is a real doddle, turbo's back exhaust and remove the boost restrictor. I'd stick some steel wheels in the standard turbos and then it'll last forever.

Occasionally I think I'm too old for racing, then I get in the car and do few laps and I'm hooked again. Had a blast last weekend for 8 laps till the clutch fork broke.

for 4 k i reckon i could get 250 rwkw easy..... not sure about 300

going back abit and off topic (in regards to sydney kids and meggala's discussion) my car makes 360rwhp atm and i drive it everyday with out any hassles and brings back 300km to the tank. costed me $80 in fuel to drive it from syd to bris and with 3/4 of tank left in it. the clutch is hard and i do drive through city traffic. my car feels as normal as any other car untill boost hits at 4k then its hold on. personally i think a 300rwkw rb25 with forgies thats serviced regulARly and looked after can be driven every day with ease. thats my 2c

Hi RNS11Z, 300 rwkw is 410 rwhp and close to 500 bhp. That extra 50 bhp stretches just about everything past its "safe" limit. The rods are past it, the injectors are out of flow, it needs a big fuel pump (noisy buggers), the clutch really has to be multiplate, the std radiator is too small, needs an oil cooler, o'ringing the block or a metal headgasket is necessary, any drop in octane and it pings like crazy, ditto on hot days, gets cranky with the aircon on, needs a really big intercooler (cut the bumper etc), lots of fabrication ot fit parts (never as well engineered as standard) and you just can't drive them fast in the rain.

That's been my experience anyway. Plus I get a lot of similar comments from people at driver training days and suspension clinics that say they went just a bit too far with chasing more power. The happy ones have around the 260 rwkw in their GTST's and 300 rwkw in the GTR's. And that's right where you are 265 rwkw.

Hope that adds to the discussion some more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Literally looks like direct port nitrous haha
    • They are in fact just nozzles. They are there only to produce a spray pattern and limit flow. The injector itself is what I use to control flow to the 7x nozzles. My old system had no injector and only PWM the pump. This lead to a lot of inconsistencies, and poor atomization at low pressure when the pump was ramping up. 
×
×
  • Create New...