Jump to content
SAU Community

Tomei Dump Pipes For Gtr Bnr32, Bcnr33 And Bnr34

Beer Baron
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

Hi guys,

I bought these for my GTR but I have massively overspent of late so need some cash. These are a work of art. Far nicer than any of the other japanese dumps. both the HKS and trust dumps I have seen were not finished nearly as well as these, both had some rough edges inside etc. I have seen people make gains when switching from HKS dumps to these tomei ones. The tomei ones are not split, but have one massive opening which gives maximum flow which is exactly what you want for both power AND response. Plus without a divider they will fit straight onto any of the popular Garret or HKS or N1 turbos as some of these have a splitter built into the ex housing (meaning with trust or HKS dumps you have to mod the dump or the turbo).

The kit comes with 2 dumps, new dump to front pipe studs and nuts, and O2 sensor adapters so you can use in 32, 33 or 34 GTR.

They are brand new in sydney and I'm after a lowly $620 + postage or pickup in sydney northside. these truly have to be seen to be appreciated. they are so nice.

pics coming.

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

also worth pointing out, the outlet on HKS dumps is 60mm. these are a manly 70mm. very good if you have 70mm front pipes :(

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

lol, it's not a fridge but an ancient top loader washing machine and never for sale. it's been working since the dawn of time and still going strong.

ooops, just realised you may mean the fridge in the reflection! it's stacked with beer so can't sell that one either! lol

I should mention the photos are crap because I took them whilst i was a bit pished after coming home from a night out last night.

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

yeah them old washing machines can't be beat. mine is at least 30 years old.

now let's drag this topic back to dump pipes. chat not allowed in FS and I'll have to give myself a warning in a minute. and yes I'm serious.

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

Risking, they are stainless, but very high grade. with ceramic coating on the flanges and amazing finish inside the pipes.

franky: the stock front pipes are around 55mm ID so it would be wise to upgrade to at least some dual 60mm into 70 or 80mm single pipe. dual 70mm to a single 80 or 90mm would be ideal though. but they will still work with stock front pipes and most brands of aftermarket front pipes though.

anyway, it doesn't matter now as they are sold. :D (well pretty sure they are)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...