Jump to content
SAU Community

Recommended Posts

Ok

so i have a problem

Basically, my master and slave cylinder arent doing anything

i cant pull fluid from the bottom with a speed bleeder, but none of the lines are clogged (ran air through everything)

and broke apart the master cylinder to check for bad seals etc etc

im ordering a rebuild kit anyways

Im using an r33 gt25t slave and master,

but i also tried a 260rs master as well.

i have elimnated the loop and its straight from the master to the slave.

any ideas?

pedal isnt kinked either.

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/
Share on other sites

we tried for 5 hours today

beside, if you take the bleed screw off the side, it should damn near pour out, and it wasnt

also i have no speedo or tach.....but thats another problem for another day

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051001
Share on other sites

well after about 2 hours

we removed it, pumped it, stuff barely came out

so we broke it apart to see if there was a clogg, or bad orings, and after we put it back together, the fluid came out liek it was supposed to....but put it back on teh car, and nothing

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051010
Share on other sites

the thing in the middle that i take off all my cars with that big loop

no....

i never install it

But we DID try it with that installed first, but to cut down on fluid having to pressurize fr bleeding, we took it out of the loop.

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051036
Share on other sites

LOL double post

Well anywyas, im going tomorrow to order a master cylinder rebuild kit, anda friend is next day sending a RB20 master cylinder in case.

this thing will be working

if anyone can think of something else please throw it out!

everyone on my end is stumped

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051059
Share on other sites

I found you have to open the bleed nipples a fair way aswell, to get good flow.

we took them all the way out also

as well as taking off the main line going from the master cylinder and putting hte speed bleeder(its an air assisted bleeding tool) and it still didnt work.

and as i said, i blew through the lines, adn there was no restriction....its reallllly odd

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051065
Share on other sites

i would suggest that you have an air bubble in the top of the system somewhere when it is installed and no matter how much fluid you pump through there it will not escape unless you can find a way to get it so that the bleed nipple is the highest point of the system.

i have had the same problem with several of my italian bikes in the past and it seems to be the only way we could get the rear brakes to work on them at all, and we had to do this by removing the brake caliper from the swing arm and tipping it upside down so the nipple was above the centre line of the master cylinder.

hope this helps in some way?

cheers oxford

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051133
Share on other sites

Sounds like a master cyl problem. I read here somewhere that the seals turn inside out

sometimes for no apparent reason.

i was thinking that, thats why i am going to get a rebuild kit.

im just trying to make suyre that im not missing something simple stupid

as far as getting ht ebleed point as high as possible, the one on the side of the master cylinder is as high as it gets, and nothing was comming out.q

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051142
Share on other sites

sorry meant to also suggest removing the caliper/s from the mounts and getting them as high as possible too while pumping the pedal with a block between the pads so your pistons don't overtravel and come out, as there may be a spot that is holding air in the caliper?

if you work on an airbase there should be a nice steep load ramp or somethin you maybe able to use so that the front of the car is at the highest point then chock wheels securely, and remove calipers from mount and get them as high as you can and forward of the master cylinder if possible up ramp, pump fluid through manually until you have some thing like pedal feel, then start car and continue process, as the brakes are vacuum assisted they sometimes won't bleed properly until there is vacuum in the system.

good luck

cheers oxford

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051182
Share on other sites

fill the master 1/2 way or so and put the compressor onto the top of it and blow it through so it starts feeding to the slave. or u can take the master out and fill it with oil when it is disassembled so its not full of air behind the piston.

mine had same issue and the compressed air sorted it str8 away :bunny:

Link to comment
https://www.sau.com.au/forums/topic/164664-im-stumped/#findComment-3051200
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...