Jump to content
SAU Community

Recommended Posts

  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yes, that's what i meant. Airflow is 1080-1100 when on idle.

If i rev it does go back to the same level.

Is that a bit high?

I wonder if I've soldered the wires incorecctly but i thought it wouldn't work at all if i did that.

It's a series II so i had to share the 2 ground signals (from memory)

Also, I've been looking around at maybe getting a replacement or still hanging on to the fact that this one is OK and just set up wrong.

I saw a unit on the Jap Auctions and looks as if the signal ground (guessing) has it's own 'C' clip that would bolt onto the body for grounding rather than going thru the ECU.

Also, that wire was extra long on the Tomei plug which suggests it should be different and had the length to be wired into the chassis.

Would this change the behaviour of the signal overall?

..and, if peeps are looking at getting one, they are on nengun as a Tomei branded Z32 for $360 delivered.

If i get a replacement, i think i will get that one.

It's so much freeegan hassle to get around this and i don't wanna risk getting another dodge one.

And that is possible as i don't think these other dodge ones were sold to rip people off, just the seller, even reputable sellers, didn't know about this bad batch ???

Anyway, just putting it out there as an option, bit more expensive but only $50 over the cheapest I've seen.

..and, if peeps are looking at getting one, they are on nengun as a Tomei branded Z32 for $360 delivered.

Yer, they're the ones i just got and will be installing within the next few days.

Funnily enough tho, they came in a what looked to be a genuine nissan box :D

Thats correct as its not a genuine Nissan part number - Its a Bosch part number

The Bosch Z32 AFM still has the Nissan (JECS) part # on it (22680 30P00 A36-000 N62) and the Bosch part # is on the box (F00E000202).

Yes, that's what i meant. Airflow is 1080-1100 when on idle.

If i rev it does go back to the same level.

Is that a bit high?

I wonder if I've soldered the wires incorecctly but i thought it wouldn't work at all if i did that.

It's a series II so i had to share the 2 ground signals (from memory)

I had a look at datalogit log I took some time ago.

My Z32 afm on idle see's 1165mv on average. It never sways more than 10mv either way providing I don't touch the steering or pump the brakes. :stupid:

But it is a 3ltr so it 'may' suck a little more on idle.

Yes, I got the dyno done and the replacement Z32 is working fine. Not so happy with the power output though of 200kw non shootout mode. It is a low reading dyno, but I was expecting more power.

At 1.3bar it's making 190kw at 5500rpm, but then it just flatlines the power curve. Even at 1.5 bar it gives slightly better mid range, but the same flattening out of the power curve occurs. The boost does not drop off at all with the AVCR, it holds steady to redline. My tuner thinks it's the justjap intercooler I bought, and suggested that I replace it for a thicker ARC item with low pressure loss. The AVCR Duty cycle is at 40% and holds boost steady. Knock count is at 14 W.O.T. with an AFR of 10.0 from 6000rpm to redline.

What I have is;

Series 1 RB25DET with 1.8mm headgasket. (newly built with 6000km run in)

Standard cams

Apexi pod filter & Z32

Greddy Inlet Manifold

Apexi Cast top mount exhaust manifold

Garrett GT30/40 .63

Tial 38mm external wastegate

Greddy Type R BOV plummed back

Power FC and AVCR

720cc Nismo's.

60x30x76 tube and fin FMIC with 2.5" piping throughout.

3" exhaust from the turbo back.

Should I put money towards an ARC intercooler, or should I install a set of 256/264 hks camshafts next?

Is the 1.8mm headgasket lowering compression so much that it is effecting the amount of boost I have to run to reach my target of 250kw?

Edited by silman

Well Silman, at least the Z32 is sorted

Did you find when you swapped it over and started the engine, it was crap idle and needed an obvious retune, or was it still OK to drive just with more room to move on the verticle axis?

Birnie - is you new AFM working well now? Has it been tuned.

1. Is there any comparison Dodgy vs New with regards to volts at idle?

2. Anyway we can tell a bad one before the tuner has almost completed a tune

I am getting a new one, making sure it doesn't have the Nissan embossing but not sure what else I can do..

Cheers fellas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...