Jump to content
SAU Community

Recommended Posts

^^ have you had any problems with the police?

none as of yet *touch wood*

as long as it's a good balance between allowing the yellow through and looking dark it's not really noticeable unless someone points it out to you. one of those subtle things that you cant quite put your finger on.

it's easily removed with a solvent - that said, reversing is a bitch with the windows and lights tinted

none as of yet *touch wood*

as long as it's a good balance between allowing the yellow through and looking dark it's not really noticeable unless someone points it out to you. one of those subtle things that you cant quite put your finger on.

it's easily removed with a solvent - that said, reversing is a bitch with the windows and lights tinted

fingers crossed! It looks very smart tho specialy on a black car, i like it well done.

has anyone got pics of their indicators done in that nightshades stuff? i tried my local repco and auto barn and they only had the spray. does normal (window) tint film work on indicators?

I did the spray on my indicators (yellow) just to see what kinda look it gave, and it was sweet.

Just tape around it and spray away.

Ended up swapping to the nismo smoked indicators... same thing.

  • 1 year later...

I like it ALOT!

I have been thinking about doing this to my 4 door R34. Im still deciding.

1. Laws lol

2. If i ever want it the was it was originally (for resale for eg) can I the SPRAY off?

Any help would be much appreciated :happy:

You can get the stuff off fairly easily, but I would recommend a clear gloss over the top cause it does dry almost matt...

I do need to give them a gloss coat..

The lower black strip was done with vinyl...

post-26316-1212250725_thumb.jpg

and thats using clear light assemblies with coloured glodes, I should take a phot of them light up in day to show you...

Edited by 75coupe
You can get the stuff off fairly easily, but I would recommend a clear gloss over the top cause it does dry almost matt...

I do need to give them a gloss coat..

The lower black strip was done with vinyl...

post-26316-1212250725_thumb.jpg

and thats using clear light assemblies with coloured glodes, I should take a phot of them light up in day to show you...

Looks good mate did u do that to the outer of your break light or get in behind it?

Its done on the outer of the lens, I guess I could of done it inside the lens but that would mean breaking apart the assembly which is different to stock ones.. If your using the stock light it will definitely need to be done on the outside of course...

Looks good mate did u do that to the outer of your break light or get in behind it?
Its done on the outer of the lens, I guess I could of done it inside the lens but that would mean breaking apart the assembly which is different to stock ones.. If your using the stock light it will definitely need to be done on the outside of course...

Ohh good! :P

I just did the reverse and indicator light on my four door 34 be cos its seperate to the round break lights i wanted to match it to the car (its black) and give it more of a classic skyline look. I just wanted to make sure it was ok to do it to the outside because of sun exposure and such. Just to clarify have u used anything to protect the spray like a gloss coat?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...