Jump to content
SAU Community

Recommended Posts

hey guys, im just undertaking a project and need some advice.....

im putting a rb20det (silver top) into my aussie delivered r31 and im right with everything except one thing:

the rb30 loom thats goes to the computer has three plugs that plug into the dash harness, and the rb20det has different ones, do i need to modify them to suit? anyone have any ideas? please help

Edited by disco
Link to comment
https://www.sau.com.au/forums/topic/166043-rb20det-into-r31/
Share on other sites

Call Kev Rowley (07)3814 4674

He put the RB20 into my Datsun 120y and i run factory management. He also has a R31 with a RB25 Neo with the full tiptronic auto all wired up. He has wired and built many Nissan vehicles with different engine configurations. He can even send you a completed engine harness that will plug in to your car with whatever engine you are running. :P I guess what i'm trying to say is, I wish he was my Father :(

He wants to RB26 my Datto :D

Call Kev Rowley (07)3814 4674

He put the RB20 into my Datsun 120y and i run factory management. He also has a R31 with a RB25 Neo with the full tiptronic auto all wired up. He has wired and built many Nissan vehicles with different engine configurations. He can even send you a completed engine harness that will plug in to your car with whatever engine you are running. :) I guess what i'm trying to say is, I wish he was my Father :worship:

Yep Kev's the man, he knows anything and everything Nissan/Datsun.

He wants to RB26 my Datto :mellow:

Hahaha, he said that he wants to RB26 my coupe last time I was talking to him :laughing-smiley-014:

Call Kev Rowley (07)3814 4674

He put the RB20 into my Datsun 120y and i run factory management. He also has a R31 with a RB25 Neo with the full tiptronic auto all wired up. He has wired and built many Nissan vehicles with different engine configurations. He can even send you a completed engine harness that will plug in to your car with whatever engine you are running. :) I guess what i'm trying to say is, I wish he was my Father :worship:

He wants to RB26 my Datto :mellow:

that is just PHAT pics we want pics

after trying to do it myself using the instructions on the r31skylineclub forum, wouldnt start (no injector pulse) so i have bitten the bullet and sent my harness off to Kev so he can smick it up for me, he is a really nice guy to deal with and i wish i had have done it straight away it would have saved me frying an ecu :ninja: thanks guys for your advice :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...