Jump to content
SAU Community

Recommended Posts

hey guys,

last post i was talkin about getting a whitline spring/shock package, well i've been looking around, getting prices etc and have found that really only koni, kyb and bilstien make shocks for the r33 and all are standard length. Well now i'm thinking i'll just buy the bilstiens and some king springs (30mm lower) save about $200, a local suspension joint told me that they rang bilstein and they say that the standard length bilsteins will have no problems with 30mm lower springs. i'm sure bilstien wouldnt make a special shock just for whiteline as the whiteline kit is about 30mm lower also. Anyone looked into this or done this type of suspension setup ? feedback ?

cheers

lenno

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/
Share on other sites

i'm sure bilstien wouldnt make a special shock just for whiteline

Actually i dont know what you mean by special, but Whiteline shocks do have additional circlip grooves machined into their housings to allow for height adjustment.

Also i believe they are valved to suit the spring rates as specified and used by Whiteline in their kits.

I think Sydneykid could add to this as i believe he knows more than a thing or two about the Whitleline kits . (as well as all other things automotive.:D )

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/#findComment-341712
Share on other sites

hey guys

thanks for the help, but really i'm no closer to making my mind up.. either go the whiteline kit or get the shocks and springs seperate, $200 saving.

also if the dude i'm taking to outta syd it right, trying to ring him atm...he sells the bilsteins for $441 a pair, which is the cheapest i could find.

cheers

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/#findComment-344481
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Salut Frederick. Belle 370z. Welcome to SAU! 
    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
×
×
  • Create New...