Jump to content
SAU Community

Recommended Posts

DRAG GTR 1000+HP OS Giken Race Engine, 6 Speed Holinger Sequential Gearbox. $120,000

Immaculate R33 GTR purchased in 2000 with only 13000km. Developed from standard road GTR into one of Australia's highest modified Drag GTRs. Numerous magazine articles including HPI magazine's 3 Litre Streeter. OS Giken RB30 race engine has HPC coated dry sump, ported race head with oversize valves, custom manifolds & plenum, GT42 Turbo, MSD coils, water to air intercooler, 12 x 1600cc injectors, Motec M800 & CDI with datalogging, huge magnaflow fuel pump & custom tank, Dedenbear water pump, OS Giken Quad plate clutch, Apexi hydraulic torque controller, Line locker, ATS 1.5 way front & rear diffs, HKS suspension, Carbon fibre brakes with Strange engineering aluminium calipers, Velo Carbon/Kevlar race seat, Momo steering wheel, custom dash with Autometer gauges, Custom lightened doors, Custom front bar, Deist parachute, Moly Roll cage, Willans harness, HP fittings & quality braided line used throughout car. ANDRA tech inspected.

GTR has had limited use due to no track in Adelaide. Best time so far is 9.45 153mph. Has been out of action for a number of years while undergoing further changes & current setup has fresh engine build, fresh Holinger gearbox, brand new paintjob, new intercooler & ignition setup, brand new turbo & wastegate, etc etc. Too many custom details to list. Over a quarter of a million dollars has been spent on this car over the last 7 years.

The car is now finished & was tested at Heathcote in mid April. Running only low boost & conservative tuning the GTR ran 9.9 145mph. This GTR is magnificent to drive & has been built by Willall Racing with the best of everything. It has the potential to run into the eights on radial tyres & any buyer with regular access to a track will have no problems doing so.

I am looking for an outright sale, but will consider a trade in. If the right sports car came up I may trade the GTR + cash balance for it.

A 4WD race car with almost 1hp per kilo & carbon fibre brakes that can almost lift the rear tyres off the ground is an amazing thrill to drive & will impress any hard core driver game to take the wheel.

post-538-1178889045_thumb.jpg

post-538-1178889086_thumb.jpg

post-538-1178889133_thumb.jpg

Edited by Munro
Link to comment
https://www.sau.com.au/forums/topic/166434-photos-of-9-second-r33-gtr/
Share on other sites

Thanks Brett.

A number of reasons. Main one is fairly obvious - No track to race on in Adelaide.

Been waiting for years for them to get their act together & I have just had enough.

It is hugely expensive to race these cars interstate on a regular basis.

I am running a small business that is open 7 days a week.

I have a toddler & a new baby on the way.

Between business & family commitments it has just become all to hard &

I have lost interest.

Whoever does buy the car (unfortunately will probably go overseas) will get

one of the most highly developed & professionally finished GTRs around

at a fraction of the cost to actually build one to this level.

It has been awsome to own & drive - wish I got more use out of it but thats life.

Full boost has some good photos of it from Heathcote a couple of weeks ago

at the LS1 Drag Nationals.

Seriously the next person that posts anything other then genuine interest in buying Johns car will be banned, pm him if you have other question

John and Keir as far as I'm concerned are pioneers of drag/big hp skylines with the development and times they ran in Australia, many of us would even class them as legends

Please give John the respect he deserves or I will BAN you

Hi John, been a while mate.

Bradley Here.

Congrats on the new family members.

I remember the day you first bought it and going for a cruise oh how things change.

Even the colour is changed, looks sweet :D

Anyway i wasnt sure if you still had the footage of it in full flight, so i hope you dont mind me posting it here.

9 meg AVI - http://www.users.on.net/~danzig/Munro-9seconds.avi

Save it out to you Laptop if you don`t have it already.

Ill have to catch you up soon one day.

To anyone interested in this car, it is a machine that is worthy of ownership and has had tender loving care thru out its ownership, i was lucky enough to witness it being developed from stock and would be a worthy buy.

Good luck with the sale John, hope to catch you up soon.

Moderator dont ban me please we go way back and all, thanks.

Regards, Bradley, aka GTR King.

Edited by GenReaper

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...