Jump to content
SAU Community

Recommended Posts

Not sure if this has been posted, but just noticed that the 2007 Gumball 3000 has started..

From London to Asia and BACK!!!...

Should be interesting, already had trouble with the German police setting up roadside checking stations JUST for the gumball cars..

Best advice, check out the forums, as the main website is RUBBISH..

http://forums.gumball3000.com/viewforum.php?f=11

You can track their progress on http://maps.google.com - put this link - http://www.rallybird.eu/blog/ftp_incoming/...l%20Day%201.kmz - in the "search maps" area and click search.. it will load it and display their GPS markers..

Should be exciting, def looking forward to seeing some of the footage to come out of this years...

Maxamillian is a Jaguar XJ220S which is an interesting choice, doesn't seem to be any Jap cars this year.. someone should run a R34 GTR in it!!

Link to comment
https://www.sau.com.au/forums/topic/166682-gumball-3000-2007/
Share on other sites

They have something similar on this year, starting Brisbane, if I can find it i'll post it up..

Just found this:

And finally, with 2008 being Gumballs �10th Anniversary� the event is already rumoured to be pushing the boundaries of entertainment even further with an incredible 3000 mile route of flying and driving from London to Moscow and onwards to finish in Sydney in 8 just days � it�s going to be HUGE!

So look forward to next year if this is Sydney as in Australia Sydney :)

I posted a link in the Vic section:

http://www.skylinesaustralia.com/forums/in...howtopic=166708

There are also photos from when I went in 05 on here somewhere too if you search.

Route here:

http://www.alk.com/gumball/route.asp

should do one in oz say brisvagus to melb :laughing-smiley-014:

gumball 3000 is like 3000 MILES not 1900 kms i drove from brissy to melbourne in 14.5 hours once dude. wouldnt that be great all these rich mofos come in their ferraris and lambos and shit and drive for approx 10 hours (going by the footage i have seen on the net of guy doing some seriously stupid speeds) and then they get to the end and have their lil party get back on the plane and go home all over in one day that would be really really gay imo

It has been suggested that it would come to Australia for the 10th anniversary and go from Darwin to Sydney. This was before the speeds were reduced in NT though. Oz is a long way from anywhere else and when you consider the idea of the event is it is completed in around 7 days.

gumball 3000 is like 3000 MILES not 1900 kms i drove from brissy to melbourne in 14.5 hours once dude. wouldnt that be great all these rich mofos come in their ferraris and lambos and shit and drive for approx 10 hours (going by the footage i have seen on the net of guy doing some seriously stupid speeds) and then they get to the end and have their lil party get back on the plane and go home all over in one day that would be really really gay imo

and then receive the speeding tickets that were issued by the million or so speed cameras that operate in victoria. :)

http://www.gtspirit.com/

Some great updates..

Update 18:01 CET:

Steve just messaged us that team 25 had a chance to put their foot down in the Carrera GT on an amazing bit of highway in Greece without any traffic. They reached over 200 mph.

not holding back I see..

Hmm.. I can feel the carefactor:

Update: Locals got injured in the crash, we hope they are ok. Our thoughts go out to them and their families.

http://forums.gumball3000.com/viewtopic.php?t=2584

Gumball 3000 has been cancelled after the death of a Macedonian on the roads who's car was hit by a gumballer..

Press release

From the main page:

Issued by Maximillion Cooper on behalf of The Gumball 3000 Rally - 21.30 / 03 May 2007

Following our earlier release reporting yesterday’s accident - As a sign of respect we have decided that this year's Gumball 3000 Rally will not travel any further and will end in Bratislava this evening, May 3rd 2007.

As the organisers of the rally we feel that it should be stopped as a mark of respect to Vladimir Cepulyoski who died today after an accident involving one the participating drivers.

We are very saddened by what has happened and feel that it would be wrong to continue. On behalf of Gumball 3000, we once again extend our deepest sympathies to his family and we are doing everything we can for them.

This is the first time anything like this has happened in 9 years of travelling through over 40 countries with 1000's of drivers and it is with deep regret that I make this announcement.

Maximillion Cooper

Founder & CEO

The Gumball 3000 Group

For any media enquiries call Mission - 02074916680

Another sad loss of life..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...