Jump to content
SAU Community

I'm Getting Bad Boost Cuts/boost Leak

Richy

By Richy,
in Engines & Forced Induction

 Share

Recommended Posts

Richy Rookie

Richy

Posted
Posted

my r33 gtst is boost cutting or leaking, i'm not quite sure which one it could be but basically whenever i boost more than 5 psi, boost just wont hold, it either spikes at high rpm's or i don't feel the boost at all. For example the other day i set the boost to about 9 psi and at full throttle it spikes a little (not much) to 4/5k rpm and past that it will just start cutting like it doesn't wanna go any further. So now it's set back to 5 psi but i need to get rid of this problem. I've been told so many different things like Coilpacks need to be changed, intercooler could be leaking cos a friend installed it not a mechanic, BOV could be leaking etc.

Link to comment
https://www.sau.com.au/forums/topic/167012-im-getting-bad-boost-cutsboost-leak/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

do you have a front mount? if you do where do you have the controller taking its reading from? if it is from the bov hose then relocate it. have a nipple installed on the hot intercooler pipe.

what does the cutting feel like? is it a hard start/stop? or is it like a spluttering? if it is a spluttering then try gapping your plugs down, and taping up your coils.

bubba Grand Master

bubba

Posted
Posted (edited)

I had the similar symptoms the other day on my 32.. a hose clamp had popped off but the pipe was still in the hose (i.e. it hadn't popped all the way off). Was driving back from the shops and it would start to spool then at 4k it would kind of cut out.. I've had a hose pop right off on the highway once before and could barely keep the thing idling and driving it to the nearest exit was a complete bastard.

This time I could still drive if didn't go over 4k.. got home, popped the bonnet and found a hose clamp where the cooler piping joins the crossover pipe had let go :)

BUT could be the stock ECU's fuel cut happening on your 33 :)

Edited by bubba
mad082 Grand Master

mad082

Posted
Posted

bubba you could be onto something there. if you had a hose that wasn't sitting on right, and once it had a fair bit of force on it it was opening a gap up it would cause a loss of boost pressure and the car to run overly rich, which could be the cause of this issue. it would be worth checking the cooler piping.

Richy Rookie

Richy

Posted
  • Author
Posted

i'm gonna try taking off the intercooler and connecting it straight to the turbo, the cut feels like the airs just spluttering everywhere its spooling but just feels like its going nowhere. i got a stock ecu. I'll post results of the intercooler removal tommorow. thanx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...