Jump to content
SAU Community

Recommended Posts

Its not unheard of. Case in point - The current Holden Barina is inferior to the model it replaces, as Holden have obviously decided a lower priced/lower quality car will better suit the marketplace.

This doesn't apply, as Holden sources these cars from other GM brands, it doesn't desgin and build them itself like Nissan Japan did with the Skyline. Holden decided to switch from the European "Opel Corsa", to the cheaper Korean "Daewoo Kalos", while keeping the Barina name. Nissan obviously didn't do this.

It was not a comparison, I was answering his question but I guess you missed that bit.

Maybe, but it doesn't relate to this argument though does it? So its not relevant.

Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3105623
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

This doesn't apply, as Holden sources these cars from other GM brands, it doesn't desgin and build them itself like Nissan Japan did with the Skyline. Holden decided to switch from the European "Opel Corsa", to the cheaper Korean "Daewoo Kalos", while keeping the Barina name. Nissan obviously didn't do this.

Maybe, but it doesn't relate to this argument though does it? So its not relevant.

Seriouly, I BEG that you read before you post things like this.

Smurf said:

Why would a car manufacture release a new model that isnt superior to the previous model?

Holden, have "released" their "new model" barina and it is NOT superior to the "previous model"

He asked a question and I answered it.... And then you tell me it does not relate to the argument.... I WAS ANSWERING HIS QUESTION...... PLEASE FFS don't make me say it again! :rant:

I know that the new barina is sourced from Daewoo but it is still the car Holden have released as the NEW barina!

Edited by r32line
Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3107149
Share on other sites

in my opinion, a R33 puts power to the ground ALOT better than a tail happy, tyre frying R32 does. The R33 feels like a much more stable car and when lightly modified, is still a comfortable off boost daily driver. THe R32 is like a go kart, actually similar to a S13!

Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3107229
Share on other sites

I just picked up my R33 gtst, and after been in mates cars not actually driving them i can notice a diff that the R33 is much smoother

in my opinion, a R33 puts power to the ground ALOT better than a tail happy, tyre frying R32 does. The R33 feels like a much more stable car and when lightly modified, is still a comfortable off boost daily driver. THe R32 is like a go kart, actually similar to a S13!

couldn't agree any better there about boost their like a normal car .. IMHO..

Edited by Yme33
Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3107299
Share on other sites

Hahaha, i dont agree with that statement at all. You cannot apply rules like 16% more power but only 6% more weight means its faster... I know the R33 is quicker (in a straight line) but just because one cars power to weight ratio is better than another cars it does not mean that car is going to be faster. How a car puts its power down introduces countless other variables....Tyres, AWD vs RWD vs FWD, Traction control system, launch control.... I wont bother continuing

I did say 'simplistically'. As for how the cars get their power down, I thought we were comparing GTS-t with GTS25-t? Both RWD without traction control/launch control. Both have VERY similar rear suspension (geometry, spring rates etc). We were comparing stock for stock, but I doubt anyone has stock tyres anymore, so we'll just assume same tyres for both, both have same sized rims so that shouldn't be a problem. Both have R200 VLSDs, so they'd both get the power down the same way there. Both have very similar gearbox ratios too. The difference is the R32 has a ~5% shorter diff ratio (4.363 vs 4.083 from memory) which would increase acceleration compared to the R33. But R33 has more torque at the engine to start with, so it's negated, leaving the R33 faster.

I realise you can't use power to weight all the time, but these 2 cars are VERY similar, so in this case, you can and it does work. The R33 IS faster in a straight line.

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3110390
Share on other sites

  • 2 weeks later...
LOL

put an RB25 into an R32 ;)

then you get the power in a much nicer looking car.

sorry just had to say it

But then this whole discussion would prove pointless :(

Coming from a Honda background.. people always go on about Hondas being gay because they are small,light and reasonably qucik. My ITR, was just on 1000kg. Has a tiny 1800cc NA motor and would do 13.8 @ 100mph all day.

Then you get the people in their bigger Turbo cars saying things like " Well if my ****** was that light it would be 10x qucker than that shit ass Honda..." Is it me or is it just them trying to make their penises look bigger? *shrugs*

Kinda went off track. :thumbsup: My bad.. continue :( (would like to add im am currently in the market for an R33.. so im not a Steriotypical Honda driver :excl: )

Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3138583
Share on other sites

Why nissan even bothered to make a 6 cylinder 2 litre engine is beyond me. It just added unnecessary weight to the 32. They already had some brilliant 2 litre engines laying around and should have used one of them.

As for looks, Every time i see a 32 I look for a backward baseball cap in the near vicinity or in the car itself.

The 33 is far more classic coupe design and will be the most timeless of all of them in the long run including the 34. (guess which one I drive) :P

Link to comment
https://www.sau.com.au/forums/topic/167183-33-vs-32/page/2/#findComment-3145039
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...