Jump to content
SAU Community

Recommended Posts

ITEM: Rims: 4 x VOLK RACING C ULTRA 18"x9". They are a 3 piece forged rim with a nice dish. PCD of 5x114.3 and OF +24, spacers and wheel nuts included

Front Tyres: Marshal Power Racer II, 265/35zR18 93W

Rear Tyres: GT radials Champiro HPZ-35, 265/35zR18 93W

CONDITION: Rims: Very Good

Front Tyres: 5-6mm tread on outer side with major inner camber wear

Rear Tyres: 7-8mm tread all round with slight outer edge scuff marks from rubbing the outer guard

LOCATION: Townsville QLD

PRICE AND PAYMENT: $1200 ono $1100 ono, Cash or Direct Deposit

DELIVERY: Willing to ship Australia wide at buyer's expense

EXTRA INFO: These rims were trial fitted to my R32 GTR for the photos and they fit perfect. Wear on tyres was from previous owner. Not interested in swapping for other rims or parts, just after the cash.

CONTACT: PM or phone 0438797053

PICS: Now Working, see below.

post-15445-1178856824_thumb.jpg

post-15445-1178856861_thumb.jpg

post-15445-1178856872_thumb.jpg

post-15445-1178856888_thumb.jpg

post-15445-1178856969_thumb.jpg

post-15445-1178856992_thumb.jpg

post-15445-1178857009_thumb.jpg

post-15445-1178857031_thumb.jpg

post-15445-1178857056_thumb.jpg

post-15445-1178857082_thumb.jpg

post-15445-1178857104_thumb.jpg

post-15445-1178857120_thumb.jpg

post-15445-1181121842_thumb.jpg

post-15445-1181121864_thumb.jpg

Thanks,

Chunners

Edited by Chunners
Link to comment
https://www.sau.com.au/forums/topic/167325-18x9-volk-racing-rims-with-tyres/
Share on other sites

Hey mate I might be interested in the rims but for some reason all the pics on the site arn't working. If you could please foward me some pics via PM that would be great.

Cheers.

Hey mate, i can't seem to uplaod any pics on this site at the moment. Whats your email? i'll send them that way if you want.

Thanks,

Chunners

can you please measure the spacer in mm and pm me? i want to know how much of the offset is from the spacer, to see if i can fit to my current works spacers for a r33. thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...