Jump to content
SAU Community

Recommended Posts

was there the week earlier was going to go last week but wasn't organised in time. im going again this week are you?

i Drive a Wine Red one with front lip and 18's.

i wont be racing this week. in 3 weeks most probably. but il b there

as a general rule you want to be able to load your torque convertor up to the revs that your engine is starting to produce torque and hp. if your engine starts to make its power at 3500RPM, then that is where you need to be able to load your torque convertor up to. the higher your power comes in, the higher RPM torque convertor you require

would also suggest fitting a shift kit, causes the auto to shift a little harsher between changes but takes the sluggish response out of the shift change. not sure how you can buy them now but you use to be able to get them in stage 1; stage 2; stage 3 and full manual shift. the higher the stage, the harsher the shift and can make general smoothness of your changes driving around town a little unpleasent.

you may find a remarkable increase in your quater mile times by these changes. any reputable high performance auto rebuilder should be able to design what you want if you take in your dyno sheats of your hp and torque readings.

hope this helps.

Yeah thanks i have got a stage 2 shift kit and Transmission cooler, I'm very happy with the shifts it's just getting it off the line that's killing my overall time it either Bogs down or Spins if i load it up against the torque converter it hesitated then it goes.

My ecu's and some accesories got stolen on the weekend so i have decided i'm going to give the emanage ultimate a shot so i will see how that goes even though i think with my old setup if i got a good 60ft and got it moving off the line i should have ran a high 12.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...