Jump to content
SAU Community

Recommended Posts

Car is running nice now that it is finally on the road. But the exhaust noise that it makes are un-bare-able. How do you guys get along with a car that is louder then mine is beyond me, I got an headache after just 30 minute of driving...slowly...

MUST BE OLD AGE KICKING IN!!! eek.gif

Anyways, to "supress" the noise as my neightbors wouldn't like it much either, I have got myself an Apexi ATS (Active Tail Silencer). I didn't go for the butterfly valve one is because I want something that is automatic, and I heard that the electronic version of the butterfly valve can go wrong and not open when they are suppose to. So full boost + close butterfly valve = Turbo in the Bin...

Saying that, the ATS silencer does open up on high load, but I am not sure how much it restricts the flow still. Right now I am limiting boost to 1.3Bar because of the restriction worries. The same setting on the boost controller without the exhaust bung will give a 1.35Bar boost.

I just want someone a bit more technical to confirm me that it is safe to run high boost (aiming for 1.6bar) with that bung. If it isn't safe, then what should be the limit.

The exhaust is a 90mm exhaust with no center silencer, the ATS is a 115mm one. The turbo is an HKS TA45S Turbo so most of its power will be from 5K-8K. It also run a screamer pipe so it will ease the exhaust flow a bit when it is on full boost.

Thanks for the help. I am enjoying every minutes of it (finally!!!)

Link to comment
https://www.sau.com.au/forums/topic/167962-big-boost-with-exhaust-bung/
Share on other sites

Better off getting an inner muffler along the way, ditch the cannon and go a better dual muffler at the end of it or add a resonator along as well, much better options take your pick. Good luck with that

Cheers

A

mate, those exhaust thingies are shit. I have both an insertable bung that can go in the end. heavily robs power, and makes revs climb very slowly.

I also have an exhaust control valve - same as the bung. makes it a lot less powerful. revs climb about 1/4 the speed it used to. and the worst is, it's nto that much quieter.

The Apexi ATS made a difference for sure. You can talk with it in, you cannot think with it out.

When it is on boost, all valve open, and screamer pipe on full chat, its fine. It is when you are driving normal speed at 120km/h that it really kills you.

I'll get it on a dyno and see how it goes. The 115mm bung was able to flow the same horsepower on a 300hp BCNR33 GTR, so it isn't that restrictive... Dyno show no difference around 300bhp as confirm by the American magazine dyno

But it is a big difference when you are talking about double of that power. :rant:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...