Pics Of High Mount Gt3540 R33 Gtst

[bazr33]

Hey guys

just quickly im just after pics of there engine bay or whoevers that has a highmount gt3540 (preferably with the .84 rear housing, well really doesnt matter about exhaust housing.

just seein with clearances and shit

Well might aswell ask, i have my intercooler pipes running over the engine and over my radiator, im just curious if the turbo will hit it and if i have to my my power steering cannister thing???

and any other info , about changes made etc..

[SIDEWAYS R33]

i have a r33 with gt35/40 highmonted i will take pics tomora and upload 4 you

[bazr33]

sweet as mate thanks

did you have to move anything out of teh way, or relocate shit to fit??

[SIDEWAYS R33]

no not much at all it tight fit with dump pipe tho but i have a 4 inch dump but you dont need to move anything show pics tomora

[ULOOOK]

.82 rear housing it is mate. You need to re-locate the power steer res and im pretty sure you have to get rid of the L pipe that comes out of the throttle body. You will also need to heat wrap the dump pipe.Thats all that i can think of atm.

[Craved]

Most of the changes required will be determined by the location of the flange on the manifold.

my 3040 is on a maifold that set further back to the firewall so i cannot run the outlet pipe where the ps resevoir would be so it had to go facing down then 90 bend to the font of the car ..

regardless the L pipe as mentioned will need to go

[bazr33]

ohhh fark

oh well low mount it is, cant be stuffed moving shit blah blah blah.

Plus i have a custom low mount for it

see what happens

thanks

Any pics for it i still want to see if yous have any please

[Guilt-Toy]

look in my gallery

[GeeTR]

look in my gallery

*Drooools*

[Guilt-Toy]

lol they are old pics with my stock bottom end.. when the forged bottom end went it there is much more bling bling.. will have to update my photos

*Drooools*

[SLIPPERY]

Have a look here. Scroll down a little for some full pics

http://www.skylinesaustralia.com/forums/in...howtopic=163509

[SIDEWAYS R33]

here is some pics

[Gazee]

if the cops seen these engine bays they'd shit themselves...

[SIDEWAYS R33]

its my daily driver to

[bazr33]

i just got my gt3540r internal gated turbo in the mail today, and found out that its a 1.06 rear housing.

does anyone have this turbo on their r33, plus if any more pics that yous have would be great.

I am changing my mind like i change my jocks.

I have made my decision final and i am gettin a custom high mount made, with a wide mouth dump, and intercooler pipes changed to miss the turbo.

This will all be down in the next 2 and a half weeks.

Also like to thank you guys with the pics you have showed me

[GTR1993]

its my daily driver to

Get some insulation or something on that dump pipe, extremly close to the ac lines and looks close to heater hoses too.

[Sammie]

lol bazr 33 thats fairly big expect some lag ! unless ur doin some engine work, i hav gt3076 internally gated turbo in the standard low mount position, and id rather it there for cop reasons when someone looks under my hood it still looks like a standard 25 which is good and bad but saves alot of hassle

sam

[Craved]

i just got my gt3540r internal gated turbo in the mail today, and found out that its a 1.06 rear housing.

does anyone have this turbo on their r33, plus if any more pics that yous have would be great.

so you got an Xr6 turbo's turbo ..

i ran a HKS gt3040 with 1.12 rear housing and poncam -- full boost at 5000rpm .. way to laggy for the street as to get on boost you have to be doing 30-40kms over the limit

someone has used this turbo before, have a search it'll be there somewhere

[bazr33]

changing setup now, hahaha after all those posts

it will just be a hassle for me and too much stress on my stock engine.

if it was the .82 or smaller, i would of been sweet.

going something bit smaller,

still going high mount though, but just different turbo

[STR8E180]