Jump to content
SAU Community

Recommended Posts

i have a r33 gtst its has a few mods

gt35/40 .82

highmont exhaust manifold

custom intake plenum

splitfire coils

nismo injectors

pwr intercooler

power fc

hks cams

exh cam gear

fuel pump

xf throttle body

z32 air flow meter

external wastegate

how much power yous thinks i should make and where should i get it tuned in melbourne must be good with power fc thanks

Edited by SIDEWAYS R33
Link to comment
https://www.sau.com.au/forums/topic/168001-r33-that-need-a-tune-help/
Share on other sites

Speak to rob at CREATD (i would offer my services but im flat out for another 3 or so weeks), see my signature for phone number he does GT35's and FC's all day everyday and has a few 10 second R33 gtst manuals sitting about the place.

He just finished JT from autobarn narre warrens GT35r R33 and it made around 330rwkw. They have a brand new 4wd hands free dyno dynamics which is very nice to use.

Edited by URAS
Which cars ran 10's? That's bigger news than it sounds...

MSA/CREATD black beast 10.63 @128mph or something from memory i have the vid but for some reason i cant upload ATM? there is a skyline banner instead of the upload menu??????

I think Lee out at Melbourne Performance Centre in Bayswater has one of those DataLogit things. He recently did a pretty good job on my RB25DET / Wolf combo to stop it pinging incessantly. Don't know how he is with PFC, seems to prefer Motech.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...