Jump to content
SAU Community

Recommended Posts

heading back from a west cruise lastnight, my front right bank blew.. had a proper look today to see i need a wheel alignment bad!

in the end, ive decided to get 2 new front tyres for my 17 inch advan rims..

where in the east can i go to get an alignment and 2 x new tyres cheap? i dont want el cheapo tyres, i want the good shit. im currently riding on Bridgestone potenza's..

any recommendations?

Link to comment
https://www.sau.com.au/forums/topic/168121-dang-need-new-tyres/
Share on other sites

heading back from a west cruise lastnight, my front right bank blew.. had a proper look today to see i need a wheel alignment bad!

in the end, ive decided to get 2 new front tyres for my 17 inch advan rims..

where in the east can i go to get an alignment and 2 x new tyres cheap? i dont want el cheapo tyres, i want the good shit. im currently riding on Bridgestone potenza's..

any recommendations?

I go to Total Tyres in Oakleigh - 8564 1166, they have always been cheaper than anyone else when I ring around for prices. If there's somewhere better in the area post it up for all to see.

Edited by Fry_33

I have Bridgestone Potenza S03's at the moment which are awesome but at over $320 a corner, I'm not replacing them with the same again.

This time I am going for Firenza's which are on recommendation from Techsport (Evo tuners) as the owner runs them on his race car. Currently the distributer is undertaking some agressive penetration marketing and they are (for my 17" rims from him), just under $200 a corner. They seem to have a good rep with him and are something to with Bridgestone or Federal, I forget which.

thanks for the help guys :D

i had a SAU member sell me acouple of decent low profiles.. should do for the time being.. when i have a cash hike, which should be in a few weeks, ill tear em up and go get potenza's again i reckon

Josh

I'm also running the RS2's on my gtr, and must say they really do have a lot of grip, awesome on the street, and very progressive near the limit.

got them for 250 a corner, for 245 17inch at tyre power in glenwaverly, after ringing around, I found their prices to pretty much be the lowest for most brands, have to recommend them!

I have Bridgestone Potenza S03's at the moment which are awesome but at over $320 a corner, I'm not replacing them with the same again.

This time I am going for Firenza's which are on recommendation from Techsport (Evo tuners) as the owner runs them on his race car. Currently the distributer is undertaking some agressive penetration marketing and they are (for my 17" rims from him), just under $200 a corner. They seem to have a good rep with him and are something to with Bridgestone or Federal, I forget which.

Mate, don't go for the Firenza's. They told me they were great when I got new 18" and I paid extra for them but they were a death trap. Good in the dry, but as soon as it got wet they would spin everywhere, especially say doing a U turn from the lights. Whenever you put a bit of lock on, no matter how slow you were going, and I mean literally crawling around a corner from the lights they would spin and slide. The car was basically undriveable in the wet while accelerating, and on cornering it felt like the tyres were really squirmy on the rims. The car is only 160rwkw too.

I just put a pair of Pirelli Dragons on my 17" rims on the front and they are great, cost me $265 each. I run Toyo T1-S on the back and they are easily the best tyres I have ever driven on, wet or dry. Grip is unreal! I got them a few years ago though and they cost me $350 a corner, but I think the T1-Rs which replaced them are cheaper now?

Cheers,

Nick

Mate, don't go for the Firenza's. They told me they were great when I got new 18" and I paid extra for them but they were a death trap. Good in the dry, but as soon as it got wet they would spin everywhere, especially say doing a U turn from the lights. Whenever you put a bit of lock on, no matter how slow you were going, and I mean literally crawling around a corner from the lights they would spin and slide. The car was basically undriveable in the wet while accelerating, and on cornering it felt like the tyres were really squirmy on the rims. The car is only 160rwkw too.

I just put a pair of Pirelli Dragons on my 17" rims on the front and they are great, cost me $265 each. I run Toyo T1-S on the back and they are easily the best tyres I have ever driven on, wet or dry. Grip is unreal! I got them a few years ago though and they cost me $350 a corner, but I think the T1-Rs which replaced them are cheaper now?

Cheers,

Nick

Too late, Firenzas were put on yesterday! Opinions so far (have only driven in the wet), they seem very good. I havent booted it yet as I just want to get used to having tread again but so far they seem good. Will give another update in a month once I have some more km's on them.

Appreciate the feedback though. :dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...