Jump to content
SAU Community

Wanted To Trade - 2 X R33 Gtst 5 Speeds For High Hp Auto Setup

Guilt-Toy
 Share

Recommended Posts

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted (edited)

I am looking to trade the 2 R33 GTST Box's i have one in the car and one sitting at home for a Auto Setup that can handle at least 500hp at the rear wheels for a R33 Skyline.

I can also offer the pedals and master / slave and clutch lines to go with this if your interested and clutch / flywheel Exedy 5 puk.

Looking at something that is driveable on the street as well but aiming for low 10's on the track.

One box has 80,000kms and in EXCELENT condition which could sell for $1700 on its own and one has around 170,000 that needs the 4th gear syncro clip replaced (will be done prior to trading) so both box's in good or excelent working condition for trade.

I AM NOT INTERESTED IN SELLING a box yet unless you offer me 2k. Just EOI for trade at the moment please!!

Edited by Guilt-Toy
SECURITY Grand Master

SECURITY

Posted
Posted

hey champ,

i doubt anyone with a built auto will want to trade to manual, what i suggest doing is buying a standard auto box, selling your manuals and using the $$ to build your auto.

-standard autos have SEEN 320kw on standard internals, with just a valve body upgrade.

otherwise try convincing me to swap lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...