Jump to content
SAU Community

Recommended Posts

hi i have a few things i need to sell as im not using them anymore, coming off an r33 gtst 94 model.

parts are in melbourne, sth east suburbs can deliver if you agree to pay

first up is a HKS SS BOV like new with plumback piece $150 ono

will swap for standard r33 BOV and cash adjustment (needed in one week for EPA please help)

(EDIT) Autometer Pro-comp 2 1 1/6" air/fuel ratio gauge, good condition with wiring and harness $60 ono

shift light good condition, yellow with lid $20

standard r33 gts-t front brake rotors with a bit of meat left, been machined and roadworthy and in good condition, they are 28.2mm thick around 6 months worth they rekon $50

stereo, Alpine twin 12inch subs in professional box with all wiring and grills $450 ono like new

Alpine MRD-M500 mono block amp V12 series with digital reading and volt meter, etc good condition$250

can sell amp and subs together for $600 with wiring, and few extras.

K&N pod filter ok condition with adapter and heat shield $40

Home theater system also for sale lol, comes with JVC pro amp and Digital Acoustic Emerald 703 tower speakers and surround speakers on stands with all wiring, remotes and manuals. Awesome sound system hardly used like new. payed

$2000 for it from JB, selling for $1000 ono

also if anyone has standard BOV and exhaust i can do a swap, i need these bad for an EPA test in a week

i have other bits and pieces like interior parts that i will sell also if anyone is interested, just ask.

All parts are in good condition and can be looked at by ringing me to organise a time and place.

PM can be sent for pictures or any enquiries.

ring Sam on 0421 795 757

cheers.

Edited by habibz_r33
Link to comment
https://www.sau.com.au/forums/topic/168406-r33-parts-and-stereo-parts-for-sale/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

BUMP all parts still for sale, prefer melb buyers i can deliver if in melb, otherwise buyer pays for frieght if need be.

pics coming up soon, please ring for any info or about prices/swapping.

cheers, 0421 795 757 Sam

i have a stock 33 gtst bov that i dont use after getting a gfb one. $50 if your keen

ill let you know tomorrow because i agreed to swap mine with a stock one, and if it falls through ill buy yours, cheers

Edited by habibz_r33
BUMP all parts still for sale except for Blow off valve and pod filter.

if anyone has stock boost solenoid and exhaust for r33 gtst, please let me know i can organise to swap parts or buy them

BUMP parts need to go this week! all offers taken,

0421795757

What models are the subs?

the subs are type S 12 inch SWS - 1242D

Enormous bass and outstanding performance. they feature quality parts such as thick stamped steel frames for extra durability.

RRP: $219.00each

Peak Power: 900W

RMS Power: 300W

Frequency Response: 28Hz - 1kHz

Kevlar Reinforced Pulp Cone

Aluminium Coated Poly Parabolic Dust Cap

Extended Dual Flare Vented Pole

Progressive Nomex Spiders with Integraded Tinsel Leads

High Excursion Injected Santoprene Surround

Double Stacked Magnets

One Sided Terminal Layout

Heavy Duty 8ga Push Terminals with Connection Jumpers

Hidden Screw Gasket

Designed and Engineered in the USA

post-14144-1179201532_thumb.jpg

post-14144-1179201597_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...