Jump to content
SAU Community

Nsw Fs: R32 Gt-r V-spec Bbs Alloys 17 X 8

Dave R31
 Share

Recommended Posts

Dave R31 Enthusiast

Dave R31

Posted
Posted (edited)

I have a set of BBS alloys from an R32 V-spec GT-R. These are very rare rims that were factory fitted on R32 V-Spec and V-spec 2 to clear the larger brembo brakes on these models. They should be a good fit on most 5 stud skylines. I bought these for my HR31 coupe but I've decided not to do the 5 stud conversion at this stage.

They are 17 x 8 +30 offset, 5 x 114.3 PCD. All rims are in good condition but there is some light gutter rash and marks typical of 14 year old rims. There are 2 x 235/45/R17 hankook ventus with good tread (refer pics) but the other two tyres need replacing due to bad camber wear.

Asking $1800 $1500 ono

I am located in the Newcastle/Port Stephens area but depending on final price I am happy to travel to hornsby etc to meet a sydneysider.

If you are interested or need any more info please pm me or email [email protected]

100_1601.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1603.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1604.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1605.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1606.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1607.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1608.jpg

http://img.photobucket.com/albums/v484/dav...le/100_1609.jpg

Edited by Dave R31
  • 5 weeks later...
  • 1 year later...
  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...