Jump to content
SAU Community

Safc + Afm On Your Nics Rb20det

RB20_ZED

By RB20_ZED,
in Engines & Forced Induction

 Share

Recommended Posts

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted
Whats a NIC's? By the way I had a rb20det ecu(setup for a standard rb20det AFM) running perfectly with my 300zx afm & safc2...there's a special setting in the safc2 to configure the 300zx AFM. I hope that helps.

The Nics is one of the early HR31/200ZR redtop versions of the Rb20.

RB20_ZED Collaborator

RB20_ZED

Posted
  • Author
Posted
I haven't heard of anyone running a different afm on a Nics before.

Have a read here which has a bit about the safc on a Nics: Click here

Thanks for that - got a good insight into the issues.

I've got it in at a shop getting tuned at the moment... seems like good news so far.

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted
Thanks for that - got a good insight into the issues.

I've got it in at a shop getting tuned at the moment... seems like good news so far.

Good stuff, I was thinking of putting a SAFC on mine as I've got a jap chipped ecu for my Nics which runs a bit rich and made 160rwkw with afr's dropping as low as 10.8:1.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • GTSBoy
      Neil's R33 Gts-t Build

      By GTSBoy · Posted

      Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
×
×
  • Create New...