Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
Guest Malleus

I got mine replaced with bog-standard Nissan Maxima wheel bearings, they're interchangable apparantly. Cost something around $200-250 for the bearings and about $100 for labor (they spent hours trying to get the old bearings out, as the bearings had fused with the casing...much swearing was involved, along with a big hammer)

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-38618
Share on other sites

I'm not sure what kind of sound stuffed bearings make. The noise mine makes increases with speed and sounds like really bad tire drone (but isn't). At 40kmh its barely audible, it gets really noticable at 80kmh+. This sound like bearings to anyone?

It all started after the rear right wheel had an unfortunate meeting with a curb, so could be driveshaft or bearings.

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-40402
Share on other sites

So do Maxima bearings fit front AND rear? Does anyone know?

Shell, your car has done over 100 k km yeah? My mechanic mate reckons they should be done then.

Prolly get mine done soon-ish ( 57 k km) I've got alot of tyre noise but lately I've been wondering if the bearings are noisy. No grinding sounds though :confused:

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-40418
Share on other sites

yep Dino my car's got 120,000 on it poor old girl :O

I'll ask the guys about the bearings when I get her serviced then.

Gradenko, that tyre drone noise sounds similar to my noise. It kinda pulsates though, louder, quieter, louder, quieter....etc. It's hardly noticable though, and some days i don't hear it at all.

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-40619
Share on other sites

Yeah, that sounds like what mine is doing - a pulsating drone that varies with speed. I find that its a lot more noticable with the windows up and driving on smooth roads, which is pretty much due to lower background noise.

I'm having it looked at on Wednesday, so I'll be able to get back with whether its the bearings or if I busted a driveshaft.

red900ss, I'll find out on Wednesday about Maxima bearings being used as replacements.

Sorry about hijacking the thread, thejackal!

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-41697
Share on other sites

Well, my problem is definantly rear wheel bearing related. Mechanic said that rear wheel bearings cannot be replaced as something in the hub is bent if they start acting up (I probably got the explanation wrong). So no, Maxima parts are going to be no use for rear wheel bearings. From what I understand, rear wheel bearings were never meant to be a servicable part and they only start making noise after a hard impact.

He also said that it won't affect handling (as its a rear wheel) and that theres no reason to fix it... as long as I can live with the bloody drone! So yeah, I get to save some money and leave it as it is, but will be on the lookout for a 2nd hand hub (at the right price) all the same.

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-43029
Share on other sites

  • 2 years later...
yep Dino my car's got 120,000 on it poor old girl :mad:  

I'll ask the guys about the bearings when I get her serviced then.

Gradenko, that tyre drone noise sounds similar to my noise. It kinda pulsates though, louder, quieter, louder, quieter....etc. It's hardly noticable though, and some days i don't hear it at all.

hahaha 120,000k's and you think its old... mine has done 190,000k's and its running fine..

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-1071085
Share on other sites

  • 4 months later...

I've got a similar drone from around 70km/h to 80km/h but then it goes.

Rear wheel bearing you think or maybe fron? My passenger side front makes a bit of noise when you spin the wheel when car is off the ground, I havent checked the rear as yet?

It's a bit annoying because it's the speed driven at the most

I didnt think it was a bearing because its only at that small range of speeds and doesnt get noisier when you go round corners...

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-1237333
Share on other sites

Some are midas are good some bad. my dad put his van in to one. They replaced the rear brake shoes but couldnt adjust the park brake so it worked. My dad went back with it and they mucked around for an hour or so without fixing it - and with a van time is money couldnt afford for them to stuff around.

I was hoping to get info off other here.

If I jack the rear of the car and put it in 4th and get to 70km/h with wheels off the ground I should hear a dodgy rear wheel bearing right.

I checked my fronts and the passenger one is a lot more free and makes more noise than the drivers side one when I spin the wheel.

Link to comment
https://www.sau.com.au/forums/topic/1689-wheel-bearing/#findComment-1237680
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...