Taking Out Back Seats :/

[Chi100188]

how do u take out the back seats for a R33 ? because im installing Tein coil overs....i've searched the forum but didn't come up with ne thing that can help me hmmm could ne one shed some light? or paste a link that could help me or even post some pics up of the process

Cheers

Chi

[are33]

Hey bud, Undo the two bolts near the floor, then with a bit of force pull them up off, you need to put in a bit of effort as they are clipped into the body of the car, then undo the bolts that hold the backrest of the seat up, and they usually just lift off.

Then = access to your suspension.

win!!11111

hope i helped.

[Habler]

Like OBNXSH said... just remember that they are stuck in their preety freakin tight and need a damn good tug to get out. And need to be pushed just as hard to be put back in. Just make sure you get them lined up properly before hand and then drop a good old knee down and they should pop straight in.

[siddr20]

Im pretty sure you will need to take the back parcel shelf out as well..

In order to do that, im sure the side plastic bits need to come off.. plus seat belts..

Im gonna be replacing my rear shocks tomorrow, so i will be doing the same..

I might take some pics if you need them..

[jrocket]

You can get the rear shelf out without taking the side plastic bits off. You can kinda flex the shelf at the sides to get it out. There is like this little tab at the bottom of the plastic side bits that slot into the rear shelf. With the seat out you might be able to get ya hand in the sides and feel them. I just lifted the shelf a bit and kinda bowed the shelf to allow you to get it outta these slots. Also the shelf seemed to have a few press in clips but this popped out very easy.

good luck

[evil_weevil]

When I put my suspension - didnt need to take parcel shelf out, mine was flexible so was all good, just had to hold it up a bit although if you do have "big hands" it'll be a tight fit

[are33]

i have a custom made parcel shelf made from MDF, so its a bitch to get in and out

[T04GTR]

yeah. two bolts and a sharp jab with a pry bar