Jump to content
SAU Community

Recommended Posts

hey guys

as most of u know, in nsw we have p plate bans since 11 july 2005.

However, I am getting disqualifed from court soon, for speeding.

I am a current P plate holder, have had my license since 2004.

Will I still be able to drive Turbocharged & V8 powered vehicles?

The RTA website says :

Who will the prohibited vehicle condition apply to?

The prohibited vehicle condition applies to:

A re-issued P1 or P2 licence due to a disqualification for a driving offence that was committed on and after 11 July 2005.

Now, I'm pretty sure i fall under that, but alot of ppl have been telling me different.

When they say, re-issued, does that mean after like after being cancelled for good or what? anyone know the go?

Thanks Fellas :P

Link to comment
https://www.sau.com.au/forums/topic/169432-another-quick-license-question/
Share on other sites

If you 'had' to go to court and lost your licence then no V8 or turbo for you. If you simply lose it due to points loss i beleive you will be fine, however if you were disqualified and went to court then your stuffed. Friend of mine lost his for dui special range (.01) on P2 and when he gets his licence back no v8 or turbo, also your p's will start again as told by police and the court. i.e the two years for P2 will have to be done all over again even if your licence was removed a week before you were to change to blacks. Very harsh if your in the same boat as my friend.

thats incorrect, when u get it back you can drive turbo/V8, only thuing is you will need to get your L's again hold those for 10days then do your P's again.

my mate got done DUI then got got caught driving without a licence, lost it fo0r 27 months and he has had to get his L's again and then go for his P's again but he has no restrictions

I would ask the RTA when the situation occurs. My friend lost his P plates in court also...similar situation. He wasn't required to return to L's or pass the driving test etc or anything but was required to lodge an exemption request for his two skylines.

He is now able to only drive his own cars (R31 & R32) which were given immediate exemption, but he is no longer able to drive mine for example.

Its quite possibly there is different rulings depending on the reason you lose your license in court. i.e DUI and speeding result in different processes.

thats incorrect, when u get it back you can drive turbo/V8, only thuing is you will need to get your L's again hold those for 10days then do your P's again.

my mate got done DUI then got got caught driving without a licence, lost it fo0r 27 months and he has had to get his L's again and then go for his P's again but he has no restrictions

if he lost it for 27 months and is on p's again now then he lost it before the 2005 date that they brought these rules in. In which case he'd be able to drive turbo/v8 again, however in our friends case the licence cancelation will be after that date so no turbo or v8.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...