Jump to content
SAU Community

Recommended Posts

No

Sealed batteries are legal in the boot.

Well Vic at least, and we have some of the worst laws.

Remember a R33 comes factory in the boot :P

Im still hoping i can get my surgie in-boot passed.

It'll be a challenge i think :domokun:

Yeah the 33 one is vented though i believe.

let me know how u get on with the surge tank, id love to hear from someone who has had it approved.

I wouldnt mind getting alot of my mods mod plated, but then when u get more they want to stick more plates on, so by the end of it you end up with and engine bay full of nasty blue plates. I think ill take my chances untill i have my day (every dog has its day :domokun:) and then get it all plated on one.

Ye they are vented, but thats because the batteries arent sealed.

A sealed one doesnt need venting

We just get a piece of paper here in Vic :domokun:

But yeah, i doubt i'll get the surge passed, and i can understand the reasons.

However i'll see how an engineer can guide me

Ye fuel lines and the cell both in the boot as potential leaks. Although if sealed, its no different to a fuel tank as far as i can see it if the boot is sectioned off from the rest of the car aswell. (as my car has fold-down rear seats)

So basically accident

fuel gets loose in cabin

I either catch fire and die, or i die in the explosion, either way the outlook is grim

Mmm i guess, tho i think it would take a pretty severe accident to cause the fuel lines to come off the surge tank or whatever.

Also there is alot of cars running surge tanks in the boot, how are they doing it that is minimising this risk you speak of?

cheers

Edited by 2630GTS
Mmm i guess, tho i think it would take a pretty severe accident to cause the fuel lines to come off the surge tank or whatever.

Also there is alot of cars running surge tanks in the boot, how are they doing it that is minimising this risk you speak of?

cheers

I have a custom surge tank that has all of its fittings at the bottom which avoids having any fuel lines in the boot, all you see is a boot mounted surge tank and that's it - it's been mod plated and is legal (in Qld). Speak to Richard at A.R.E. or Robin at Perfourmance Motorsports, they both do them (go to Richard if you want an aluminium one). Running lines in your boot = bad fuel smell in cabin.

Food for thought Nismoid , R31's have a kind of lift out fuel pump/swirl pot affair don't they ? Would it be possible to have a fabricated pot made and have its supply (lift) pump in the tank but on the outside of the pot ? All in the tank and self contained if you know what I mean .

Cheers A .

in QLD is illegal.

So is putting battery in boot, unless car came with it.

But i heard some poor guy got done by a dumb copper for his in the boot, in his R33 (they come in the boot stock). qld road laws are stupid.

As long as you have a mod plate from an engineer it is legal to have a swirl pot mounted in the boot however most engineers won;t approve a mod plate if you have fuel lines running in the boot (hence my custom surge tank). Battery is legal as well so long as it is securely mounted and vents externally (not inside the boot) - you do not need a mod plate for a battery mounted in your boot.

  • 3 months later...
Food for thought Nismoid , R31's have a kind of lift out fuel pump/swirl pot affair don't they ? Would it be possible to have a fabricated pot made and have its supply (lift) pump in the tank but on the outside of the pot ? All in the tank and self contained if you know what I mean .

Cheers A .

You might be able to have something done in-tank.

Would be a bit of a mission though i reckon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...