Jump to content
SAU Community

Recommended Posts

when I had my 32gts4 I dynoed it at 110kw atw (basically stock), but fast enough for me over a twisty mountan pass (and quick enough to keep up with a friend in a gtr - ok mabey he was holding back a bit because he had my girlfriend in the car, but she was still sh!tscared)

well im just really asking if its even possible to have 180kw with low boost using the right equipment?? Just curious. I was reading one the import magazines and it was going on about a consevative way of modding and it said that the point on modifying a turbo would be be trying to the most power out of it using the least amount of boost increase. So hence why I was asking if its even possible to have good numbers with low boost.

dont know why you would want to buy a new turbo to run 7-8psi.....run the stock turbo with stock boost controller with a decent exhaust, split dump pip,hiflow cat, 3" system, pod should get you to around 170kw.....raise boost to say 10psi which is still safe and you will have what u are looking for......this is alot cheaper then upgrading ur turbo, cause u would have to get an exhaust anyway....my 2 cents....

i got 188rwkw with hybrid FMIC, HKS pod, turbo back exhaust w/dump pipe on stock boost @ uas dyno day last weekend. apparently i have a 'freak car' :sorcerer:

when i had the boost controller on previously, it ran 202rwkw at 11psi

damn you.....there are others with good figures from light mods

only changes i have made are

turbo back exhaust

just jap fmic

boost controller

202.6rwkw. Hit 11psi 2300rpm, got to 12psi by 4500rpm for a bit and dropped to 10psi by redline....

damn you.....there are others with good figures from light mods

only changes i have made are

turbo back exhaust

just jap fmic

boost controller

202.6rwkw. Hit 11psi 2300rpm, got to 12psi by 4500rpm for a bit and dropped to 10psi by redline....

WTF????? is that all you got?? No aftermarket ECU?? That car must be running rich as hell.

your kidding thats awesome man!!!! Is that your R33 in the pic doing the monster burn out?? I was under the impression R33 ECU's were the cars weakest link and the first think that needed to go. keeping the stock ecu in your case is mad cause its protected well due to ecu's protection in regards to running rich. Is this common for a boosted R33 running 180-200rwkw to run on a stock ecu well like yours. Or is your R33 some kind of freak of nature!!!

Edited by LatinR33

yeah it was at the drags....put on some old stockies and sat there for a bit...

i dont know too much about whats normal, or much about r33 ecu's being new to the scene but it seems to be going good. again not sure what others are running with stock ecu...some guys said i should check if it has been modified or chipped....but i really dont know too much about it....just fiddled with boost controller to set it up and chuckedf it on....

Sounds to me your cars just a freak of nature cause I dont think the R33 ecu can be chipped or modded. Thats mad!! Some other guy here I just read got 188kw's on just an exhaust,fuel pump and power fc!!! thats nuts I know Dyno's figures arent exactly accurate but thats still alright :P Must go good regardless.

i had 195 with exhaust and intercooler on 10psi stock turbo. even have the airbox in there. it just happens. maybe its just cars from the south west lol. it was running very rich, but still made a reasonable power curve, with the exception of a massive hole at 6-7krpm. but still 195 lol.

since fitted exhaust cam gear, power fc and a few other jazz and with 12psi got 188 at the uas dyno day lol. put bosch 040 in the other day and will tune it again tomorow and see what i get, before fanging it on the skidpan on saturday :unsure:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...