Jump to content
SAU Community

Recommended Posts

CUT OFF FOR PAYMENTS WILL BE THURSDAY 5th JULY

This will allow all payments to show into the SAU account on Friday which will enable the monies to be remitted to Wakefield.

** EDITED - LATE ARRIVALS **

People that will be arriving after 4pm will not be able to access the office to retrieve their keys. I will collect all remaining keys from the office at 3.45pm and those arriving later can get their keys off myself once they arrive! I will PM my mobile number to those who have instructed that they will be arriving later than 4pm.

With regards to the key deposits, I have made an arrangement to pay the key deposit as a whole at a reduced rate. Therefore there will be no key deposit required upon collection of your keys.

I have spoken with the people at Wakefield Park and they have agreed to hold the 5 onsite cabins free for us. There is a maximum of 60 people that can be accomodated and it will be a matter of first paid, first served basis.

For those of you that have not been to Wakefield Park, each cabin has the following:

  • 5 Villas:
    • 6 Bedrooms, 3 Bathrooms, Large Lounge/Kitchen Area (per villa)
    • Accommodates 2 people per room (12 persons per villa)

    [*]COST:

    • $50 per person per night

    [*]UTILITIES:

    • Bed linen and towels provided
    • Kitchen: Bar Fridge, Microwave, Kettle, Clock/Radio, Tea/Coffee

I have confirmed that we can arrive anytime during track hours on the Saturday. I will organise a meeting time (most likely in Goulburn) closer to the day for the majority travelling from Sydney/Newcastle and other areas. If you need to arrive later than 4PM please advise so I can make the track aware.

All keys need to be returned by 3pm @ the latest on the Sunday.

Please read this and follow the instructions!

Cost per person will be $50.00.

There is also a $20 key deposit required per room and is to be paid upon pickup of your key. Please organise this between yourself and your room mate.

The Skylines Australia bank account details are as follows:

Bank - NAB

Branch - Marrickville

Account name - Skylines Australia NSW

BSB - 082 356

Account number - 546 393 766

Please put your full name in the description. If you are depositing at a branch then make sure you put your name on the deposit form (I know there is a spot for it on there somewhere) and ask the teller to enter it so he/she doesn't forget.

When you have done all this PM myself with your internet banking receipt or date and branch of deposit.

Please include in the PM:

Full name -

User name on the forums -

Mobile Number -

Amount paid -

Important - You will not be confirmed until a deposit has been made.

Paid & Confirmed:

1. Abobob

2. msnismo

3. plumba

4. D_I_F

5. Damuscat

6. Abobob

7. Damuscat

8. D_I_F

9. skylinegtts

10. impact_blue

11. Bunta

12. SAM916

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

48.

49.

50.

51.

52.

53.

54.

55.

56.

57.

58.

59.

60.

Andy and Anna in (long drive back to Brisbane)

Payment coming up!

Whats with the allocating rooms but? Normally we just sort it out on arrival don't we?

If thats what the majority want to do then I don't have a problem with that! Il edit the first post!

I say first in (to pay) best dressed. Just my opinion.

I agree too... I was just listing them whilst there wasn't alot of people involved yet. I can see how this would create confusion though! Edited!

  • 2 weeks later...
  • 2 weeks later...
Ok guys this day is getting nearer!

I have had quite a few people say they are interested in staying but very few payments so far!

Put me down for another one. I'll transfer the money tomorrow :action-smiley-069:

Hi Anna!

Me and my Anna are still planning to stay at the track and probably 2 others from QLD are we able to book the night Before and After to stay there?

Thats not a problem, just let me know the definite numbers & I will book the Sunday night also for you guys :)



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...