Jump to content
SAU Community

Recommended Posts

look good.. but why so tiny..

also do you have a pic of the whole engine bay..

just bought myself hoses, just thinkin which i can change

thanks

here's one, no reason for the size,just looks neater then a big one,now i got to make some sort of

induction for the air to come up through the botton,hmmm

post-36370-1180242891_thumb.jpg

good work ... thats pretty coOl man ... have you ducted the air from the front with a bit of flexi pipe or something? ... if you haven't it would be a good idea to do so >_<

nah not yet,trying to think of what to do an how to do it,dont wont it to look boggy like the first pic, but i like what tacker has done to his 32 in the second pic

post-36370-1180345234_thumb.jpg

post-36370-1180345343_thumb.jpg

good effort . although you should of made it bigger for more air to enter and circulate. also you will need a CAI feeding or the stock snorkle otherwise you wont be getting your potential..

here is a pick of mine . i have a CAI comming through the old smic hole.

post-35272-1180352839_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
    • I used to do that (sills with rubber jack block).. ... then I got side skirts, and there's no way for the jack to actually work there, the jack pad itself on the jack is too big. Is the answer to use a... smaller (?) jack? Hmmm.
    • I have too much trauma from every skyline I've ever seen having crushed jack points/pinch welds lol.    Yep, works 100%, it's what I use when I'm using the quick jack. Don't know why I can't also bring myself to do the same thing when I'm using a jack. I blame the skyline PTSD. 
×
×
  • Create New...