Jump to content
SAU Community

Recommended Posts

hey all.

im about to purchase a hybrid(HDi) fmic kit for my 25t.

the biggest concern for me is that i dont want to have to trim the fan blades of the visc. fan. is it possible to NOT cut the fan and just run it a lil higher?

Kinda urgent as i will be getting it in a few days.. if i have to cut the blades then i wont get it.

Link to comment
https://www.sau.com.au/forums/topic/170401-hybrid-brand-intercooler-questions/
Share on other sites

hey all.

im about to purchase a hybrid(HDi) fmic kit for my 25t.

the biggest concern for me is that i dont want to have to trim the fan blades of the visc. fan. is it possible to NOT cut the fan and just run it a lil higher?

Kinda urgent as i will be getting it in a few days.. if i have to cut the blades then i wont get it.

we fitted a hybrid intercooler kit on a r34 at work ,they made the top pipe all wrong, we had a bit of trouble with it hitting the fan on top an the side, so i welded an extra 30mm of pipe to make it longer,as he never wanted to buy a new pipe,it hight have been a one of thing,an yours is a r33 (so may me a little dirrerent again)but some thing to look out for

y dont u get the pipeing that come back up through the some side that way u will have nothing to worry about

post-36370-1180341918_thumb.jpg

i got the same kit for a 33gtst and you will have to cut the fan blades unless you do what BAMR33 said and muck around with it and mount it higher. If you do this then the mounting points might not line up so there are a few things to consider. you can also get a new pipe made up for this bit and use other pipes that come with the kit but thats more expense.

yeh i would love the stock return pipes but a cold air box wouldnt fit at all..

i just hate the idea of chopping up the fan

i only had about 3mm come off mine,but i never had a hybrid kit though,wae never cut it just started the car,pushed the pipe down a bit

i take it you dont live in synney

post-36370-1180343255_thumb.jpg

hmm so i can mount the pipe a bit higher but just have to secure it.. thats not a problem.. but would the cooler mount up if i move the pipe a bit? how does that affect the fitting of the cooler?

sorry iv never installed a fmic so dont knw much, thus the newb questions, and yer i have searched for days.. couldnt find the hybrid installation guide which was on here.. so yer >_<

hmm so i can mount the pipe a bit higher but just have to secure it.. thats not a problem.. but would the cooler mount up if i move the pipe a bit? how does that affect the fitting of the cooler?

sorry iv never installed a fmic so dont knw much, thus the newb questions, and yer i have searched for days.. couldnt find the hybrid installation guide which was on here.. so yer >_<

i had the same sort of questions when doing mine :laugh: was very lost on how to do it. with mounting the pipe higher you have to check that the bonnet wont push it back down or move it when closed and be pressing against it all the time. In terms of the actual cooler it might be that the pipes are at a different angle a bit so make sure they are in enough and secure as you dont want them blowing off when you driving off but cooler should be able to move from side to side slightly anyway before fully tightening.

I have the pipes returning to stock in/out.

But on a mates car, I just aligned the pipe work first and then positioned the intercooler after. With the silicon hoses there is a little leniency for difference in installation so don't be to worried. Just trial fit over and over until your happy and ready to cut the hole in the inner guard.

I have the pipes returning to stock in/out.

But on a mates car, I just aligned the pipe work first and then positioned the intercooler after. With the silicon hoses there is a little leniency for difference in installation so don't be to worried. Just trial fit over and over until your happy and ready to cut the hole in the inner guard.

are you using one of those coolers where both the inlet and outlet are on the same side? or did you use a standard front mount and make custom piping run under the cooler and back up to the stock pipes?

yer its one of the coolers that use the over the radiator setup...

my above post was for BAMR33 lol

yeh the one you got is the standard front mount kit, some people had to trim there blades and others did not, just try and move the piping back alittle and secure it there as others have said. >_<

are you using one of those coolers where both the inlet and outlet are on the same side? or did you use a standard front mount and make custom piping run under the cooler and back up to the stock pipes?

No, I just bought a normal opposed entry/exit intercooler and made up my own SS piping. Happy with the results, but I'm now considering upgrading to a big (at least 100mm thick, custom end tanks etc) side mount intercooler with shroud and supporting water injection just for something different.

If your really worried about the fan just get a greddy spec-m they are about the same price. No trimming required.

the Hybrid kit is costing me $620 NZD delivered. i dont think the GREDDY will be a similar price?

Just chop away !

It must be the 1st and last time i ever used the chicken cutters out of our kitchen knife block :/

If you get stuck mucking around with the fitment, it really isn't worth the worry. Just chop em, feal a bit bad for about 2 days of the slightly/un-noticable/untidy bits under the bonnet and then you'll be, what was i worried about!

But you can chop em and then use a file to round off the edges to neaten it up a bit...which i should do

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...