Jump to content
SAU Community

Recommended Posts

  • Replies 126
  • Created
  • Last Reply

Top Posters In This Topic

Yes option on thicker core which I would need to confirm as at home now but 25 mm thicker so end up tanks are 90m thick extra $100 at most. Not all bars and reinforcements will need triming to fit other than GTR or 400R Bars then only small if any. If fitting yourself you will need a 3 inch holesaw to cut through the inner skirt and a grinder or better still wafer cutter and air hacksaw. When I first mentioned it to Blitz and others it all happened very fast and super busy at UAS and was asked what about the price son etc. I came up with the price knowing I could l do this as just over cost. I was trying to liase with Mick who does nice work but not the best with comunication and other. I have confirmed if getting volume then can do better so if get 5 kits can do for $100 off again and if 10 a further $60. It would have been not good to shoot too low then UAS not be happy about it or worst still losing money but rather make better which was going to do a suprise but in light of the I can get this and that for $ thought to introduce now. Also must compare apples with apples these are quality made polished, alloy pipes not to be compared with stainless or worse still mild steel. Alloy is better as lighter, dissapates the heat better and looks good. Also the shiny quality silicone hoses used. We have also improved and refined the jig to include better braket and only one peice in engine bay etc. Also re fittment if done by my mechs it is quality work, optional black powder coated mesh similar design to GTR's and carefully marked and cut and linished smooth, with lining where it comes through the inner skirt etc. Not just shoe horned in as we have seen elsewhere and things loaded up and rubbing etc. Note my enthusiast mechs are both thorough and neat and tidy and also have fitted many of them so they know where to cut etc.

Yes can do cooler only depends on thickness at a special price.

OK I just checked and noticed that the reply post I thought I put up to simplify and clarify price somehow got lost in internet black hole.

So here it is and to keep it simple.

5 or more will do $1300 supply only and extra $100 for those who want the 25m thicker although I think overkill, depending on how serious the engine and tubo is. Plus fitting which if thicker a bit more cutting or trimming but will do same price if we are fitting. Those interstate we will also do free packing freight and insurance.

PS At the track day at Eastern Creek on Monday long weekend just gone I noticed a lot of the GTS-T's still have those small heat exchange little aftercoolers and NEED to get FMIC. Or appologise to your motor next time out and whatch those fast zeds go past again. He He.

Carlo reading this??

broken

not from here

Registered: Jun 2002

Location: NSW South Coast

Car: R32 GTS-t

"

i'll take one to fit a r32.

how long to they take to make 'em? "

Only a week or so once we get to 5 ordered which should be fairly quick.

90mm size tanks core and top and bottom plate and brakets to suit R33 so no pipes or hoses $1050.

If it's possible, could we have a set end date for this group buy? I'd utterly love to hand over the cash now, but the reality is, I won't have the cash for 6 weeks or so. I don't mind if I miss out, but if I know the end date, then I know if I have to live on bread and two minute noodles for a while, while I get the cash together. :P

Ok, extreemly interested. have the $, been looking for a good kit for a while.

IS this correct, 600x300x90, all alloy piping & silicon hoses for $1550 and you guys send it to me free in Brisbane???? or i pay the $70.00 for frieght/insruance?

my email, [email protected]

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...