Jump to content
SAU Community

Recommended Posts

vic roads and on the odd occasion have light measurement detectors, i have seen em yet but iv heard bout it alot.

serious? wow thats a first ive head of it, fair enough...........

but thats vic roads? wat about the po po?

Its not up to the poilce to prove on the spot that it is 100% illegal, they dont have to.

They only to have to a "reasonable beleif" that the modification is not safe to issue a defect.

it is then up to the owner to proove the modification ( inc tint) is legal.

Commonly people who have tinted windows do get the darkest legal tint but it is on top of the factory tint or glaze and this makes the light transferance illegal.

if you want to check it your self, Repco sell a light transferance metre which is used to measure the amount of light that comes througha tinted window or glass based surface.

Its not up to the poilce to prove on the spot that it is 100% illegal, they dont have to.

They only to have to a "reasonable beleif" that the modification is not safe to issue a defect.

it is then up to the owner to proove the modification ( inc tint) is legal.

Commonly people who have tinted windows do get the darkest legal tint but it is on top of the factory tint or glaze and this makes the light transferance illegal.

if you want to check it your self, Repco sell a light transferance metre which is used to measure the amount of light that comes througha tinted window or glass based surface.

spot on, cops can deem something unsafe whether its legal or not ... if they beleive its unsafe, canary u for it, its your responsibility to get a rwc which should prove your car is legal, or indeed have to fix up a few things on the car itself.

i have heard that you can tint the qtr windows and rear windows darker and get away with it ... as long as the front two windows are 35% or greater ... but once again, depends on the descretion of the officer.

my old skyline was HELL dark ... my vlt was well below legal on every window, 5 - 7% i beleive ... difficult at night if there was no light around hehe ... looks great though...

anyone know about about this darker but legal tint??

my rear quarters say 'UV Cut glass' so i don't know if the glass itself is dark, or if there is a tint on it??

That glass is darkened from factory (ie it's not tint) and is street legal (ADR approved).

As for the regulations in Vic, not hard to find...

http://www.vicroads.vic.gov.au/NR/rdonlyre...E621/0/VSI2.pdf

Just for those who asked how to remove tint yourselves, you need:

- Hairdryer with extension cable to reach wall socket

- Razor blade (standard emo issue, come in little packets of 10)

Simply use the hairdryer to heat up the film from the inside of the car, then use razor blade to scrape away. Very easy, most of it peels off no problems, doing each window should take less than 10 mins.

Have fun!

anyone know about about this darker but legal tint??

my rear quarters say 'UV Cut glass' so i don't know if the glass itself is dark, or if there is a tint on it??

darker but legal tint?

Didnt you read the first page? :blush:

  • 1 month later...

Some insurance companies also check the percentage when the assessor comes out, usually first thing they check if they're interested in it.. and if it's too dark, and therefore unRW, they can argue that your car was unRW and they won't pay out a claim.

Depends on the company though, some companies will do anything to get out of paying a claim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...